7 Practical Tips For Making The Best Use Of Your Saab 9-3 Key Replacement
How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have a unique set of steps to add another key. It requires dealer assistance using an electronic handheld computer called Tech-2. Then the transponder must be replaced and a key have to be purchased.
Rotate your keys to prevent one from wearing out quicker than the other. This will also ensure that your keys remain in pristine condition.
Replacement Case
The new key fobs aren't like the old Saab keys. They have electronics that make it difficult to duplicate. This has made stealing cars much more difficult than it was twenty years ago. It also makes it more expensive to replace keys lost.
Saab 9-3 owners must have two working keys. If one is lost it is expensive to get another one for the vehicle because it requires replacing the CIM module and programming the locking cylinders. Dealers charge between $100 and $200 to do this.
There are a few ways to avoid these high cost. Some parts providers will look up the code from an old key (usually the same one that opens the doors and turns off the ignition) and cut a brand new metal key blade at less than the dealer's cost. The key must, however, be the same as the original one to function properly within your car.
You can also change the case yourself by following these steps. You will need a flathead screwdriver and some patience. With the screwdriver, pry apart the plastic and remove the emergency key. Once the case is open, remove all electronics and place them into your new case. Insert the correct key and badge into the case.
saab 9-3 key programming -3 replacement battery is a low-cost component that can be quickly and easily replaced. This YouTube DIY video Cyclone Cyd shows how to replace the battery for the remote key fob in just four steps. This guide should work with any modern saab key fob however, the procedure may differ slightly.
The first step is to find the button that lets off the backup key on the fob. This button is usually located close to the Saab logo on the back of the fob. Use a flathead to insert the screwdriver into the small hole in this button. This should be enough to unlock the case of the fob so that you can replace the battery.
Once the new CR1632 battery is in place it is possible to reassemble the remote key fob. You can then program it to your car. The entire process shouldn't take more than an hour. It's a simple process that doesn't require any special tools.
The procedure is a little more complicated if you've lost the key, but it's possible. The dealer will have to verify the VIN of the car, and then order a replacement key blade and TWICE module with the proper unique code. After that, they will have to cut the replacement key and then program it using a new software tool called MDI.
Key Replacement Fob
The key fob is the part that locks and unlocks your car. It has batteries inside. Batteries have a limited lifespan and eventually die. This is a problem that occurs with all vehicles and the good news is that you can change the batteries on most key fobs without replacing the whole case. You can buy replacement fobs on Amazon that include all the electronics already installed, so you can simply open the case and replace those batteries that are old. You'll need to take out the emergency key before you can replace the batteries. To do this, you need to insert a small screwdriver that is flat into the slot that is in the middle of the. The case will split when you rotate the screwdriver around it.
When you're ready to replace your keys, make sure you have spare keys, as this can reduce the total cost by a substantial amount. If you have an extra key, request the dealer to cut it and program it to your car. This is much cheaper than buying a new key fob.
It is possible to add another key to your vehicle if you don't already have one, but it will require some research and effort. It will cost you a few hundred dollars to purchase a second car key. The computer of the car also needs to be programmed. Professionals can do this however it's a costly option.
Replacement Ignition
The new SAAB 9-3 uses an advanced alarm system based on a key code. This means that should you lose only one working key, acquiring another key can be extremely expensive because the car needs to have a computer module installed and it also needs to be specifically programmed to accept a new key. Even dealers can charge hundreds of dollars to program an entirely new key, when they are not able to do it.
If you've lost your sole working key and a dealer is able to replace your car's computer (known as the CIM or SAAB TWICE) to make the replacement, and will charge top dollar for it. We can reprogram the existing EEPROM of your car's computer to make it ready for an additional key. This will save you more than 50% off the price you'd spend at a dealer.
If you have owned a SAAB 9-3 quite a while you're aware that the ignition keys are not very durable. If your ignition key isn't functioning properly, it is time to consider replacing it. They can become extremely sticky and the buttons can fall off. It's not so difficult as it may seem to replace the ignition key. With the appropriate tools, it could be done quickly.