5 Laws Everyone Working In Replacing A Window Handle Should Be Aware Of
Tips For Replacing a Window Handle
Switching your window handle is a simple project that can be accomplished in the at-home comforts of your home. Follow these steps to ensure an elegant and smooth finish.
Remove the screw covers from your uPVC handle to reveal the screws. Measure the spindle's length to ensure that you get the right size replacement.
1. Determine the Spindle Length
It is essential to ensure the correct size of the spindle when replacing a window handle. It could affect the tightness or looseness of the handle as well as whether the handle will lock properly into the frame of the window. The spindle is a steel shaft that connects the handle to the lock inside the window frame. The spindle can be found in the standard cross-section of 8mm for industry or the more traditional 9mm versions. The modern industry standard is 8mm however this was not always the case, so when buying a new handle it is essential to verify the measurements.
Take the handle off. This is done by turning the handle in the open position, and unwinding two screws that secure the handle (which are usually hidden behind plastic caps which are required to be removed). Once removed you can measure from the base of the handle to the end of the spindle. This will provide you with the measurements needed to purchase a replacement.
There are many options when you are looking to pick the right window handle. From sleek chrome that can fit into a modern home to traditional burnished bronze that looks beautiful in restored Georgian rooms, or the more traditional Tudor cottages with curled mongoose tail latches. There are a lot of options, but the most important thing is to pick the style that is appropriate to your home's decor.
Espag handles are typically used to uPVC window frames and are always the same size with a 43mm center. Cockspur handles range from 58mm to 62mm but luckily there are replacements available for both sizes. Window handles from Cadenza are different in size as they have an angled blade that functions a multi-point locking mechanism inside the window.
Another consideration when selecting the right window handle is knowing what hand you require to use. This is determined by the hand you use to open the door. Inline Espag handles can be used with right or left-handed windows. Cranked window handles are only used on windows that are open in one direction.
2. Remove the Handle
A window handle that falls out can be a hassle, regardless of regardless of whether the handle has been damaged or worn out. The good news is that you can replace a uPVC handle by yourself. All you require is some basic tools and a bit of time to complete the job.
The first step is to must open the window and make sure that it's in an unlocked position. Then, remove the screw caps that hold the handle in place. Once these are removed, you can start working on removing the handle itself.
The handle is attached to a spindle within the window frame. This is either fixed with either a screw or pin according to the type of handle. The most common handles are the inline Espagnolette and the cockspur handles. Both kinds of handles are found on casement windows, as well as aluminium ones. They can be locked using a key to prevent unauthorised opening of the window from outside or you can lock them by turning the handle clockwise.
To take the handle off, you'll need an screwdriver with a flat blade in order to remove the clip that holds the handle. After this is released, the handle will fall off the spindle. Once repairmywindowsanddoors that was previously used has been removed, you'll need take a measurement of the length of the spindle to make sure that your new handle is a good fit.
Once you have the proper size, you are able to screw the new handle in the correct position. You will need to ensure that the new handle is firmly fixed and is turning in the correct direction (clockwise for open and counterclockwise for closed). It is also essential to ensure that it has not been installed upside down.
Finally, you should replace the screw cap caps. After you've done that, you can test the handle to ensure that it works correctly. It is also recommended to test the locking mechanism by moving the handle until it is locked position and then returning it to the locked position.
3. Take the Screws off
A uPVC handle is a crucial component of any house and is the first item to show signs of wear or damage. This can be caused by natural factors or through frequent use, and sometimes deliberate damage by opportunistic criminals who might wish to open a locked window and gain entry to your home. A simple replacement can solve the issue and stop it from happening again.
UPVC handles can be difficult to open when the locking mechanism isn't working properly. Often, the problem is solved by replacing the multipoint lock rather than the entire handle, and it's definitely worth a look as it can save you money.
Once you've removed the old handle, you'll need to take off the screws that were that held it in place. They're usually on the inside of the base of the handle. It may be necessary to use a screwdriver do this. Be careful not to over tighten the handle, as this can cause it to loosen.
The next step is to find the fixing pins or screws that hold the new handle in the correct position. These are likely to be found on the inside of the base of the handle. you'll need an screwdriver or a pair of pliers to take them off them. If you wish to replace them, you can do so by replacing the screw caps and check the handle to ensure it is working properly.
Install the handle by adjusting the spindle to the cutout in the window mechanism. Then screw it into. Make sure that the handle is in an open position and that any screws are tightly fixed before replacing the screws' covers should you wish to do this. Once this is complete you're all done and you can enjoy your newly replaced window handle. Hopefully this will help you save money on window and door replacement services in the future. Contact us if need more information about this or any other aspect of your uPVC window.
4. Install the new handle
If you're replacing a damaged handle or simply changing it the procedure is simple and can be completed in just a few steps. Identifying the kind of window handle, determining the length of its spindle and knowing the tools you'll require to complete the task are key. Safety is always the top priority when working with windows and tools. Make sure you follow the steps and make sure that you have an appropriate handle to use.
To begin, find the screws that hold the window handle in place. Remove these while firmly gripping the handle to prevent it from falling and causing injury. Once the screws are removed, they can be placed in a safe spot to be replaced in the future.
After removing the old handle, you are now able to put in your new one. It is crucial that the handle is fitted perfectly to ensure that it works properly and locks the window in its place. Then move the square metal bar attached to the handle into the window mechanism hole.
The last step is to replace the caps on the screws and test the handle to ensure that it is working. If you're not satisfied with the outcome or if the window doesn't open and close as it should the next step is to contact our experts who will be able to assist you.
Almost all UK homes are equipped with uPVC Windows. As such, many will require replacement at some point because of damage or wear. The process is relatively straightforward and can be carried out by anyone with some knowledge of DIY. It is crucial that the handle you use is in line with the style and size of the window. Contact us if you are unsure about the type of handle you require. They'll be able guide you through the choices.