5 Laws Anyone Working In Replacing A Window Handle Should Be Aware Of
Tips For Replacing a Window Handle
It is easy to replace your window handle in the at-home comforts of your home. Follow these tips to ensure an elegant and smooth finish.
Start by removing the screw covers to expose the screws inside your uPVC window handle. Make sure you measure the spindle in order to make sure you're getting the correct size replacement.
1. Take a measurement of the length of the Spindle.
When you're replacing a window handle it's crucial to determine the size of the spindle correct. It could affect the tightness or elasticity of the handle, as well as whether the handle will lock correctly into the frame of the window. The spindle is a metallic shaft that connects the handle to the lock inside the frame of the window. The spindle can be found in the standard cross-section of 8mm for industry or older versions that measure 9mm. The current industry standard is 8mm however this was not always the case, so when purchasing a new handle, it's essential to check the measurements.
Remove the handle. This can be done easily by turning the handle into the open position, and unscrewing two screws that hold the handle in place (which are usually hidden behind plastic caps which are required to be removed). Once removed take door handles from the base of the handle to the end of the spindle. This will give you the measurement required to purchase a replacement.
There are many options available when you're looking to select a new window handle. From sleek chrome that fits into modern homes to traditional burnished bronze that looks great in restored Georgian rooms, or the more traditional Tudor Cottages with mongoose tails curled. The possibilities are endless, but the most important thing to do is choose a style that complements your home.
Espag handles are typically installed to uPVC windows and are identical in size, with 43mm centers (2 fixings). Cockspur handles vary from 58mm to 62mm but there are replacements for both sizes. Window handles from Cadenza come in an entirely different dimension due to their bent blade that is used to operate the multi-point lock mechanism within the window.
When choosing a window handle take into consideration the hand you use to open your door. Inline Espag handles can be used with right or left-handed windows. Cranked window handles are hand-operated and are only used on windows that open in only one direction.
2. Remove the Handle
Whether the handle is damaged or just worn out, a window handle that falls off can be a real pain. The good news is, you can fix the uPVC handle yourself. All you need is a few basic tools and some time to complete the task.
You must first open the window, and make sure it's not locked. Then, take off the screw caps holding the handle in place. Once the screw caps have been removed you will be able to take off the handle.
The handle is attached to a spindle inside the window frame. The handle is fixed by a pin or a screw, depending on the type of handle. The most popular types of handles are inline Espagnolette handles and cockspur handles. Both of these types of handles are utilized on casement windows, which includes windows made of aluminium. You can lock the handles with a key in order to prevent unauthorised access from outside. You can also lock the handles by turning them clockwise.
To remove the handle, you will require a flat-bladed screwdriver. After the clip has been released, the handle will be able to slide off the spindle. Once the old handle is removed, you will have to determine the length of the spindle in order to make sure that the new handle is compatible with the spindle's length.
Once you have decided on the proper size for the handle, screw it in place. It is crucial to make sure that the handle is securely attached and that it rotates in the proper direction (clockwise in the case of an open and counterclockwise if handle closes). It is also crucial to ensure that it has not been fitted upside down.
Replace the screw caps. After you've done that, you can test the handle to ensure that it is working correctly. You can also test the locking system by moving the handle from the unlocked position to the locked and back.
3. Take off the Screws
A uPVC handle is an important part of any house and is the first item to show signs of wear or damage. This can be caused by natural elements or by frequent use, and sometimes intentional damage caused by criminals who might want to open a closed window to gain access to your property. However, a simple repair will solve the issue and prevent the issue from recurring.
uPVC handles can also be difficult to open when the locking mechanism isn't functioning correctly. In most cases, the issue can be resolved by replacing the multipoint lock, rather than the entire handle. It's definitely worth a look as it can save you money.
After you have removed the handle, you'll need to remove the screws that were holding it in place. They're usually on the inside face of the base. It may be necessary to use a screwdriver in order to do this. Be careful not to tighten too much the handle as this could cause it to loosen.
The next step is to find the fixing screws or pins that keep the new handle in the correct position. These are usually located on the inside of the base of the handle. You will need an instrument to remove them. If you'd like to, you can replace the screw caps and test the handle to ensure it works properly.
Install the handle by adjusting the spindle with the cutout in the window mechanism. Then screw it into. Make sure the handle is in an open position and that any screws are securely secured prior to replacing the screws' covers in the event that you want to do this. It's done! You can enjoy your newly installed window handle. Hopefully this will help you avoid the need for expensive window and door replacements in the future. If you would like more assistance regarding this or any other aspect of your uPVC windows, don't hesitate to contact us.
4. Install the New Handle
Whether you're replacing a broken handle or simply making it more modern the procedure is simple and can be completed in just a few steps. The first step is to determine the type of handle, determine its spindle and know what tools you'll require to complete the task. Safety is always the first priority when working with tools and windows. It is also essential to be patient and follow the steps carefully to ensure you have a working handle that is safe to use.
The first step is to find the screws holding your existing window handle and remove them, while keeping an adequate grip on the handle itself to stop it from crashing and causing injury. Once the screws have been removed, you can place them in a safe location to be replaced later.
After you have removed the handle, you can begin to install your new one. The handle needs to be a perfect fit in order to function correctly and keep the window in its closed position. The next step is to slide the metal square on the back of the handle into the hole in the window mechanism, ensuring that it fits securely.
After the new handle is in place, the last thing to do is to replace the caps on the screws and check to see if it works. If you're not satisfied with the outcome or if the window does not open and close as it should, the next step is to contact our experts who will be able to assist.
The majority of UK homes have uPVC Windows. As such, many will need to be changed at some point because of damage or wear. The process is relatively straightforward and can be completed by anyone with some experience in DIY. It is important that the handle you use matches the size and style of the window. If you're unsure about what kind of handle you'll need, feel free to reach out to our team, who will be able to provide you with the possibilities available.