20 Up-And-Comers To Watch In The Sliding Patio Door Repair Industry
Sliding Patio Door Repair and Replacement
Sliding patio doors are a wonderful addition to any home. They're easy to operate and help provide an expansive view. However, like any other doors in the house, they're subject to wear and tear that requires repair or replacement.
Keep your sliding patio doors in working in good order by cleaning and lubricating them frequently. Lubricating with silicone spray or graphite will enable them to slide smoothly and extend their use.
Roller Replacement
If you notice that your sliding patio door isn't rolling easily, it may simply need lubrication. If the rollers are damaged or worn then you'll need to replace them. Replace the rollers on your patio door to ensure that your doors function smoothly. Also, you will require less force to open or close them.
If your patio door is an older model it might be necessary to take off the bottom part of the frame in order to access the rollers. If this is the case you can use a wooden block and a mallet made of rubber to break the frame and then remove it. Make sure you save the roller screws to use when reinstalling your new rollers.
Sliding glass doors are crucial security factors in the majority of homes and should be secured properly. Roller wheels that are damaged or worn out can make the door difficult to open or close and can create gaps around the door that intruders can exploit. By replacing your patio door rollers you can ensure that your home will be protected from unwanted guests.
After you have removed the top and bottom rails, it is an ideal idea to clean all the areas of the track using an alcohol-soaked cloth. This will eliminate any grime and make getting rid of the doors from the tracks much easier. You will be able to see drainage holes in the bottom of the track, but these often become blocked by dirt. If your track seems to be prone of collecting lots of dirt, you might want to consider installing an stainless steel u-shaped piece that snaps onto the track and provides an additional channel for water to flow through. You can get these from CR Laurence and other retailers who specialize in replacement sliding door parts.
When you are reinstalling the doors, be sure to put the bottom panel into first before putting the top one into the position. Once the doors are back in place, you should be able to test that they are able to move freely and do not require any force to open or close them. If you feel that the doors are rough, you can adjust the rollers to give more clearance.
Weather Stripping Replacement
The weather strip seals on your sliding doors wear out, which allows drafts and moisture get in. This increases your energy costs. It's an easy and simple project that will help you save money on heating bills.
There are a myriad of materials for sliding door weather stripping, each with its own benefits and disadvantages. It is important to select a material that will stand up to friction, weather changes, temperature extremes and foot traffic without affecting the operation of the door. Foam and felt, for example, are inexpensive but vulnerable to weather and visible in the frame; vinyl is more expensive but will last for many years and is durable, but could look out of an upscale home; and plastic or rubber may degrade over time and need regular replacement.
To install new weather strips, take the door from the casing. Find the headstop on the top of the doors typically small pieces of plastic or metal that is secured with screws. Take off the screws and then use a flathead to pry out the headstop from bottom of your door. Remove patio door repair weatherstripping and any remaining debris using a putty blade or scraper.
You'll require a significant amount of force to lift the door out of its track So don't attempt to do this by one person. Rather, have a helper hold the door steady while you remove it from its frame.
Locate the channels that hold your weather stripping. Plugs that are in line with the color of your doors should be placed in these channels. Take the plugs off, then pull the weather stripping to remove it from its channel.
Fin Seal is the most effective type of weather stripping for sliding patio doors. This kind of weather stripping has a Mylar fin that is located in the pile (brush material) and is very robust, suitable for almost all climates and can stand well against foot traffic. The back of the stripping is composed of a flexible, hard material that is able to endure the pressure of sliding patio doors.
Door Alignment
The sliding patio doors are a fantastic addition to any home. However, just like many other things, they might need an adjustment periodically to ensure they perform at their peak. Over time, the components of these doors can wear out or get out of alignment, resulting in problems such as getting stuck, crashing into frames, or failing to lock properly. Regular maintenance and minor adjustments can avoid these issues, thereby saving you money and time.
The most common cause of sliding door misalignment comes from damage to the tracks or rollers caused by sudden jolts and excessive force. A quick fix using the right tools can fix this issue, ensuring your patio door sliding smoothly for years to come.
Other causes of misalignment include fluctuations in temperature or humidity as well as wear and tear on the weatherstripping and inadequate installation. Parts can shift and become loose over time. This can cause the door to move and not latch or close properly. Over time, these movements can create air drafts or even allow water to leak into the house.
It is essential to clean and lubricate your sliding patio door track on a regular basis in order to prevent these issues. A small amount of spray-lubricant can be easily purchased from any hardware store and applying it often with a small amount of brush can keep the track running smoothly.
Another reason for misalignment of sliding patio doors is the latch hook not synchronizing with the strike plate that is on the jamb. To fix this, you must open the door and expose the latch mechanism. This will allow you to inspect it and gain full access. Next, locate the adjusting screw that controls the latch hook and gently rotate it in either direction to adjust the length of the hook. A properly adjusted latch will ensure that it will engage and hit the strike plate with no resistance or hindrance.
After you've made the required adjustments, test the door to make sure it is sliding and locks correctly. If there are any remaining issues, continue the process until your sliding patio door is working properly. By following these easy steps, you can save yourself a lot of money by not hiring professionals to perform expensive repairs.
Frame Replacement
Over time, screws on sliding doors' frames may loosen, allowing the frame to move a bit. By regularly tightening and checking these screws, you can prevent your doors from getting stuck or jammed. A screen that is sagging can be fixed with a little clamping. However, a loose hinge may require replacement.
It is possible to replace a sliding patio without having to replace the frame, but you must first assess the condition of the current frame. This approach is more cost-effective than a complete frame replacement and can address specific requirements like improved insulation or a new design.
A complete frame replacement involves the complete removal of the existing hinged doors, windows and frame from the wall opening. This allows a new sliding patio door to be put in and offers more flexibility in design, size and material choices.
Sliding glass doors are designed to provide you with a stunning view of your backyard, however over time they can begin to show signs of wear and tear. If your sliding glass doors are difficult to open or are stuck it may be necessary to replace the track or wheels. However, if the frame is in good condition, replacing just the doors may be sufficient.
Be sure that your work area is clear of obstructions, and that you've laid down a dropcloth. Next, lay the sliding door on a flat surface and remove any grilles or shades from the frame. Utilizing a screwdriver, remove the plugs that protect the roller adjustment screws on the bottom of the sliding frame (they are typically covered by caps). Once you've removed the plugs, you can loosen the bottom of the sliding door and pull it away from the track.
Once the frame is exposed and the frame is exposed, you can replace the track and sliding door wheels. If your sliding door track is damaged or worn out, it's best to replace it completely rather than repairing an existing one. You can purchase a kit to do a DIY project or let an expert handle it for you. In either case, be sure to follow the manufacturer's instructions for the proper installation.