20 Sliding Patio Door Repair Websites Taking The Internet By Storm
Sliding Patio Door Repairs
A sliding patio door is a wonderful option to let more natural light in and take advantage of your outdoor space. But, if the door isn't functioning smoothly or appears dingy it can be a real headache.
Luckily, the majority of these problems can be fixed with a bit of DIY expertise. Here are a few common issues and their solutions.
Dirty or damaged tracks
Over time the tracks of a sliding patio could be clogged by dirt, dust and other debris. A regular cleaning routine and lubrication will help to ensure that your door will move smoothly.
Cleaning the track is the first step. A dirty track can cause the door to snag or make it impossible for it to be shut or open. Begin by sweeping off any particles that are floating around. Use the brush and cleaning solution to scrub off any visible grime. Make sure you clean all corners and nooks as well as the areas where the door meets its frame.
After you've scrubbed the track, rinse it off by using a bucket or hose of clean water. Finally, apply an oil that you can buy from the store to remove moisture and stop future corrosion. Test the door by sliding it forwards and backwards to determine if it is able to move it with ease.
If your door is still stuck, it could be that the rollers are damaged or misaligned, which can hinder movement. In the majority of cases, you can fix it by changing the wheels and lubricating. It might be time to replace the door in the event that your door is older. Before reassembling the track down a drop cloth on the floor. Remove the two plugs that cover the roller adjustment screws located at the bottom of frame. Put a screwdriver into each hole and turn them counterclockwise to retract the rollers. This will allow you the space you need to remove the door and set it on sawhorses.
Faulty Handle
Over time the handle of your sliding door could become loose from the strike plate it is attached to. The good part is that a loosened handle can be fixed easily. Simply use a screwdriver to tighten the screws holding the door handle to the strike plate. But, be cautious not to over-tighten because this could harm the mechanism within and result in the handle not to longer function properly.
The issue of a sliding patio door that isn't easy to slide is typically caused by debris blocking the rollers. Hair, dirt and other particles often get stuck in the tracks, which makes the door stop sliding smoothly. To promote smooth operation, begin by cleaning the rollers.
A typical issue is when your sliding patio door lock no longer is working. This could be because of a misaligned lock or a broken handle. The lock mechanism could be repaired or the handle adjusted.
A screen door that isn't able to close or unlock isn't a pleasant experience. A defective screen could be dangerous. If the screen isn't aligned correctly with the door frame it could rub against frames and cause wear and tear to both the screen and door. If your screen doesn't function correctly, the solution is fairly easy. Check whether the latching bar still in place. If not, remove it and replace it with a new one. Install Repair My Windows And Doors after replacing the latching rod. Check that the hinges are properly set. Install screws into the holes in the frame to give it a finished appearance.
Faulty weatherstripping
The weather stripping on your door and frame helps seal the gap, keeping out cold air, drafts and insects. It's time to replace it if it's cracked, discoloured or hardened. It's usually easy to do. Some people just cut out the worn area and replace it, but it's easier to replace the whole thing.
First, make sure the gap isn't near the seat where the weather strip is attached to the frame. If so, you will have to reseal the weather strip to the frame using weather strip adhesive.
Next, check the entire length of your weather strip. Make use of your dollar bill to verify if the weather strip is sealed. Just place the bill part towards the seal and close the door to check whether it is able to pull away from the metal flange of the weather strip. If it is easy to remove, it is time to replace the weather strip.
It is possible to lubricate your run channel (the groove made of felt and rubber on both sides of the door) in order to prevent ice buildup during winter. You can buy a spray lubricant at your local hardware store that works however, be careful not to spill any on your glass.
Another option is to apply a thin layer of sand beneath your door prior to when snow begins to fall and prevent it from sticking like salt would. Be sure to not leave any sand on the floor of the door, though, as it can cause damage to the rubber and concrete of the weather strip in the course of time.
Glass damaged
There are many situations that could result in a sliding patio door glass breaking or cracking. If your glass patio door is damaged by a knock or bump, or any other cause, it is vital to replace it right away to ensure your home is well-insulated and sealed.
Over time, sliding doors are susceptible to damage because of frequent use and exposure to elements. Doors that aren't working properly can be caused by rusting rollers, faulty handles, or bent tracks. Repair specialists for sliding patio doors can quickly spot the issue and repair or replace the parts.
Apart from obvious damage, a damaged patio door could also impact your energy costs. Drafts and noticeable temperature differences around the patio door are typically signs that a gap is present between the door frame and glass pane. This can be costly both in the summer and winter when you are spending money to cool or heat your home.
It is possible to repair damaged glass panels on your sliding patio door without having to take out the entire door. This is the best option in certain circumstances when you want to get your sliding patio door up and running in a short time. Regardless of whether you are replacing the glass or just the frame, it is essential to have the required tools in your arsenal so that the job can be done quickly and safely. This includes gloves, a small hammer or pry bar and a putty blade, a measuring tool, and a replacement glass. DIY Door Store has all of these tools available to easily and affordably fix your own broken sliding patio door.
Frames that are loose or damaged
Sliding patio doors are designed to simplify access to the outdoors and indoors, and also allow for a natural flow of traffic. But, just like any other piece of home equipment they're susceptible to wear and tear over time that can affect their performance. While some damage can be easy to fix yourself but others require assistance from a professional to ensure your door is in top condition.
Signs of damage that are visible such as dents and scratches suggest it's time to consider sliding door replacement. These damages not only reduce the appearance of your patio doors, but they also affect energy efficiency and security.
A improperly aligned track, or even rollers, could cause your sliding door to function as it should. This usually happens due to debris or dirt accumulating on the track. It is possible to solve this issue by using the pliers to straighten the rails.
It's crucial to regularly clean the tracks and rollers of your sliding patio doors because dirt can cause stiff or sticky doors that won't move smoothly. You can remove any obstructions using hand-brushes, vacuums or even spraying down using a jetwash. Apply a silicone-based grease your tracks to ensure smooth operation and avoid premature wear.
Over time, slamming your patio door can cause serious damage to the frame and the glass panel. This can result in a broken or loose frame bent tracks, a damaged handle that is difficult to open and close. Sliding screen doors are generally more prone to this type of damage, as the frames are generally less durable than those of glass sliding doors. Fortunately, if you have damaged or broken frame for your screen door, this can often be repaired by resealing the gap using silicone lubricant, and then applying new sealant around the edges of the glass.
