20 Resources To Make You More Efficient With Double Glazing Door Lock Repairs
Double Glazing Door Lock Repairs
Are your uPVC door or window mechanism faulty? Perhaps the window or door handles aren't able to connect properly or are difficult to use.
You'll lose energy if your double-glazed doors don't work properly. This increases the risk of burglary. Owen the Locksmith can repair your door lock at a reasonable cost.
Snapped Key
It can be a hassle when a key gets stuck into the lock. This can also be a security issue, as it may make you vulnerable to burglars if your door is not locked. Fortunately, there are quick fixes you can try to resolve the problem and get your door functioning properly again.
Be sure to remain calm. If you panic and start playing around with your keys, you might just end up pushing the damaged piece of the key even further into the lock, which could make the situation much worse.
Spray WD-40, or any other penetrating lubricant, into the lock. This will assist the broken piece to be removed more easily. You can also use a screwdriver to help break pieces that might be hindering the flow. If you have a chunk of the key stuck out, grab it with the help of a paperclip or any other thin metal object and pull it. Both methods work, but you must be careful not to push the damaged key piece further into the keyway.
Some paperclips have grooved edges, which can serve as a hook extractor and some Jigsaw blades also work for this use. If you don't have any of them handy, you can make use of needle-nose pliers to bend them and create hooks. Additionally, you can make use of a pair of tweezers to grab and remove the remaining pieces of broken keys.
If you cannot remove the broken key piece then you can use a lock deicer. It is available in most hardware stores and is used to freeze any moisture present within the lock.
If none of these tricks seem to be helping, it might be time to call in a locksmith. Fitlocks experts can quickly resolve issues with uPVC door locks and mechanisms, including snapped keys and broken handles. They can also alter your double glazing door mechanisms to make them more user-friendly. You can book an appointment online for a double-glazing repair or call us to discuss your needs.
Broken Cylinder
A broken cylinder is a serious security threat. A locksmith professional can fix the cylinder. Locksmiths will need to tap the cylinder in order to fix it. This can be accomplished with a hammer, or any other tool. The best method is to make use of a wire or a long match. Place the match or wire end near the keyway. The locksmith will strike the lock and break it open. This is far better than using a heavy hammer, which could damage the lock.
The most frequent cause of cracks in the head of a cylinder is due to overheating. This can happen when the block and cylinder head are made of different metals like cast-iron and aluminium. When different metals are heated and cool at different rates, it may create hotspots in the local area that expand faster than the rest of the cylinder head, thus leading to cracks.
Another possible cause of cracks in the cylinder is corrosion. If the cylinder head as well as the cylinder block aren't properly maintained, this can result in corrosion or rust and cause them to expand at a greater rates than they should. This could lead to cracks in the future.
If your uPVC window or door lock is rigid and requires a lot more pressure to turn, it could be due to a variety of reasons. A malfunctioning locking mechanism, misalignment, or an old handle are the most common causes of this issue.
Fortunately it is a simple and affordable fix for the majority of homeowners with double glazing. A professional locksmith will usually be able to resolve this problem within an hour of arriving at your home. Depending on your needs they will be able to replace the locking mechanism, replace the window handles, or change the gearboxes. A skilled locksmith will always be able to advise you of the most cost-effective option for your home. They can recommend upgrading to 3 Star TS007 Euro Cylinders which offer an additional security layer from burglars. It's a small price to pay for the security that comes from knowing your uPVC doors are secure.
Broken Handle
It's not surprising that window handle locks could break. They are equipped with complex mechanisms that wear out over time. It isn't easy to determine the cause of the broken window handle lock and fix it correctly.
Repairing your damaged handle, regardless of whether it's the internal latch or the locking mechanism, will improve the security of your uPVC door and prevent draughts. It could be costly to replace or repair the handle in a way that isn't done correctly. It can also damage the frame and the lock of your door.
With the window in the open position, loosen the screw holding the handle using the screwdriver. The screw should be on the inside face of the back plate, normally covered by an attractive cover for the screw for aesthetic reasons. Be careful not to damage any of the internal components within the handle, for example the plates or levers on the opposite side of the spindle. Keep them in the same arrangement to make it easier to replace if necessary.
Then, turn the handle until it's 90 degrees to the window frame. Finally, loosen the screw on the back of the handle that fixes it to the internal spindle with a second screwdriver. Once the screw is loose, you can take the handle off and take out the broken spindle. Replace it with a brand new spindle, making sure it's the same length (you can purchase them online or in hardware stores). Screw it in the frame. Be careful not to tighten too much as this could damage the handle or the window frame.
Close the handle and try it. Peterborough double glazing should operate smoothly and you'll be able open your window once more.
Be sure to double-check that your uPVC window is closing properly when you're working with the handle. If they don't close correctly, you could encounter draughts or damp in your home. You could also compromise the energy efficiency of your home. Core Sash Windows is a local window company that can adjust the hinges of your window frames to ensure that they close correctly.
Broken Spindle
It is usually the case that the spindle within the handle is broken, not the handle itself. This is especially common in uPVC tilt and turn windows. These windows require a handle that operates a locking device in the window frame. The handle is connected to a central rod that triggers the cams with a mushroom shape that lock into the window frame keep. If the dead latch mechanism does not open when the handle is turned, it is possible that the spindle is broken and this could be a very frustrating issue.
There are ways to fix this issue. A reputable locksmith can swiftly and efficiently solve the issue. A professional locksmith can disassemble the handle of the window by using a tool to remove the wheel part in which the spindle is. This is done without damage to the handle or window frame.
After removing the wheel, the technician can inspect the spindle and identify what caused it to break. This involves disassembling the spindle and inspecting every component, observing any damage or excessive wear. The process is performed in a clean room by skilled technicians.
The next step is to clean the damaged spindle, this will remove any dirt or debris that might be obstructing its normal functioning. The spindle could be repaired or replaced. If the technician is replacing the spindle, he can use a dowel that is the same size to the original. Then, he will drill holes that are identical to both pieces. This will ensure that the new spindle is precisely matched to the handle.
If the spindle is damaged and cannot be repaired, it could require replacement. Home centers can sell generic replacements however if your window design is unique then you'll have to speak with a cabinet maker or woodworker who can replicate the exact part. After the spindle is installed, it is fixed to the handle. Line up the screw holes on the handle with the existing screws in the frame. Once the handle is firmly in place, you can use your uPVC windows.