15 Twitter Accounts That Are The Best To Discover Repairs To Upvc Windows
Repairs to uPVC Windows
uPVC windows are a fantastic option for modern homes. They are easy to maintain and durable, as well as long-lasting. In contrast to aluminium and timber, they do not rust or rot.
Regularly cleaning and lubricating UPVC windows and doors is crucial. This will save you from unnecessary repair costs and also improve the efficiency of energy.
1. Broken Glass
If the glass in your window is damaged, it could cause a large amount of damage to your home, which can make it very hazardous and possibly fatal. It is essential to take the time to ensure that you are doing everything you can to keep your windows in good condition.
Single-pane windows are fairly simple to replace, and they will usually fit into the old frames very easily. If you have double-paned windows which are held together by internal beading, it is harder to remove and replace the panes that were previously in use. In this case it is essential to purchase plastic spacers to make sure that the new pane fits into the window frame.
If you're planning to try to remove the window panes by yourself it is important to wear the appropriate safety equipment, including thick gloves and eye protection. It is also recommended to lay down a dropcloth before you begin working on the window panes, so that any shards fall onto the fabric, not onto the floor and could be trampled under.
It's a good idea to cover the gap with tape after the glass is removed. This will stop drafts and water from entering your home until a professional comes out to fix the window. This will also act as a barrier, deterring any intruders to gain access to your home. If the distance between the window and the door is substantial, you may prefer security screens that includes a window. This will provide the best of both.
2. Sagging
uPVC is durable, energy-efficient and affordable alternative to timber sash windows. However, with time, they may be afflicted by a variety of problems including sagging. A sagging window in uPVC could cause issues with light, draughts and even security. It is crucial to act immediately if you realize that your uPVC windows are sagging.
To fix a window that is sagging you can try to reposition the hinges. To do this, you'll need open the window so that you can access the frame. Then, remove both the hinges on the top and bottom using a screwdriver, and then adjust them clockwise or counter-clockwise. After you've repositioned the hinges, close the window and verify the fitting. If you are happy with the fit of the window, tighten the screws to secure them in place.
If window repairs near me cannot reposition the hinges, you might have to replace the seal. Over time, rubber seals lose their elasticity and dry out and cause them to loosen. It is crucial to replace your seal as quickly as you can in order to ensure that your uPVC window watertight and draughtproof.
uPVC handles may also become loose. Often, this is caused by screws that have become loose over time. However, it can occur because the handle mechanism has been worn out. It's a good thing that it's simple to fix the handle of a window that is loose yourself. First, you'll need close your window and do an experiment fit. The joint at the corner of the sash should align with the joint on the casing. If it isn't, you can use a screwdriver to loosen the handle and then reverse the mechanism back into the position it was in.
3. Water Leaks
If you wake up to wet floors and damp walls every time it rains it is important that you take action. Windows that leak water do not only lead to the degradation of your home's structure but also hamper your efforts to control the temperature within your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.
This is a simple fix that can be accomplished by any DIYer who has the ability. Depending on how severe the problem is, the old caulking may have to be removed. It is crucial to remember that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk' as this will only make the area harder to clean and reduce the efficiency of your energy.
Make sure that the drainage holes are free of debris in them, and also ensure that the sill pan has been properly angled to drain away from the window. In more extreme instances, you may need to replace the window.
Mold spots and rotten sills are also signs of water leakage. The is a fungus that thrives in damp conditions and can quickly spread across the home.
If the leakage is occurring between the double-glazed window, it is more likely that the problem is with the seal than the frame. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.
4. Faulty Hinges
Hinges could be at fault if your uPVC window is difficult to open, or if it blows open with the breeze. They can be easily replaced by any competent DIYer and are usually completed in a matter of minutes.
Almost every household in the UK will have either top hung or side-hung uPVC windows that are hinged and like any mechanical part they are susceptible to wear and tear over time. It is very easy to replace a hinge on a window however it is simpler if you have someone to help hold the frame.
It is also important to verify that the uPVC hinges are opened and closed in the right direction. You can check this by looking for the arrow on each hinge. This indicates the direction in which the window should open.
The problem can be caused either by opening the window incorrectly or due to a poor installation at the factory. Sending us photos via our website will often solve the issue. We are more than happy to give assistance.
It is also essential to ensure that the hinges are lubricated on a regular basis. Applying an engineering lubricant that is light to the hinges is an ideal method of doing this. We recommend using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also stop corrosion and decrease the chance of sticking. Ideally, you should perform this every year. WD40 and other solvent-based oils are not recommended because they can damage the parts of your uPVC window.
5. Draughts
Draughts in windows made of upvc can be caused by different things. The hinges can also become disaligned as a result of wear, which can cause an opening where the sash meets frame. If they are beyond repair, it could be required to realign them. Secondly the interlock, this is on the hinge side of the window and can be misaligned. Again, it may be feasible to give them a thorough clean, however in some cases it might be necessary to have these replaced.
The second most frequent reason for draughts is window seals, these can become worn down or damaged over time, and allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass. this will help in regulating indoor temperatures, and also lessen the risk of draughts.
Another, and most effective ways to reduce draughts is by using an draught excluder. These are typically made of fabric that are filled with some kind of filler. They can be placed on top of your windowsill. These will help to block out cold air and keep your home warm and cosy!
With a little maintenance and repairs windows made of upvc will provide an excellent level of security and insulation for your home. However, it is important to realize that windows last for a certain period of time and they may reach the point when it's more economical to replace them than fix them. If you have any problems with your upvc window it is recommended to speak with an expert immediately.