15 Reasons To Not Be Ignoring Double Glazing Door Lock Repairs
Double Glazing Door Lock Repairs
Have your uPVC window or door mechanism started to fail? Perhaps the handles on your uPVC windows or doors aren't aligned correctly or are difficult to operate.
You'll lose energy in the event that your double-glazed doors fail to function properly. This increases the chance of burglary. Owen the Locksmith will be able to fix your door lock at a reasonable cost.
Snapped Key
If a key breaks in a lock, it could be incredibly difficult. It can also be a security issue in that it can leave you vulnerable to a burglar if the door does not lock. There are a couple of quick fixes you can make to resolve the issue and make your door functional again.
Be sure to remain calm. If you panic you could end up pushing the damaged key piece further into the lock.
Spray WD-40 or another penetrating oil, into the lock. This will allow the broken piece to come out more easily. You can also use a screwdriver to break off any pieces stuck. If you have a chunk of the key still sticking out then grab it using a paperclip or other thin metal object and pull it. Both methods work, but be careful not to push the broken key further into the keyway.
Some paperclips have grooved edges, which can be used to extract hooks and some Jigsaw blades also work for this purpose. If you don't have any of these then you can bend a hook using needle-nosed pliers. You can also use a pair tweezers to grasp and pull out the last piece of broken keys.
If you cannot remove the broken key piece Use a lock deicer. It's available in many hardware stores and is used to freeze any moisture present inside the lock.
If none of these solutions work, it may be time to contact a locksmith. Fitlocks specialists are able to quickly resolve issues with uPVC door mechanisms and locks such as snapped keys and broken handles. They can also modify your double glazing door mechanisms to allow them to operate more easily. You can request an appointment online for a double-glazing repair or call us to discuss your requirements.
Broken Cylinder
A broken cylinder can pose a major security risk. A locksmith professional can fix the cylinder. Locksmiths will need to tap the cylinder in order to fix it. They can do this with a hammer or other tools, but the most effective method is to make use of a long match or a piece of wire. Then, place the match's end or wire close to the keyway. The locksmith can then strike the lock in order to crack it. This is much better than using a heavy hammer, which could harm the lock.
The most frequent cause for cracks in the cylinder head is overheating. This can happen when the block and cylinder head are made from different metals, such as cast-iron or aluminum. When the various metals heat up and cool down at different rates, it may create hotspots locally that expand faster than the rest of the head of the cylinder, leading to cracks.
Corrosion is another possible reason for cylinder fractures. If the cylinder head and the cylinder block aren't properly maintained, this can result in corrosion or rust that could cause them to expand at a more than they should. Over time, this can also lead to cracks.
If your uPVC door or window lock is brittle or requires lots of pressure to turn, this can be the result of several things. A defective locking mechanism, misalignment, or the wear of the handle are typical causes of this problem.
Fortunately it is a simple and inexpensive fix for most homeowners of double glazing. A professional locksmith will typically be able solve the issue within an hour of arriving at your property. They can fix the locking mechanisms, or replace the window handles and change the gearboxes based on your specific needs. A professional locksmith will be able to advise you of the most cost-effective option for your home. They can even recommend upgrades to the highest-security 3 Star euro cylinders TS007 that provide an extra layer of security against burglars. This is a small price to pay for the peace of mind that comes from knowing your uPVC doors are secure.
Broken Handle
It's not a surprise that window handle locks could break. They are equipped with complex mechanisms that wear out over time. If yours breaks it may be difficult to pinpoint the cause of the problem and make sure you fix it correctly.
The issue could be in the internal locking mechanism or the latch, repairing your broken handle can improve your uPVC double glazing door's security and help you stop draughts. It is costly to replace or repair the handle in a way that isn't done correctly. It could also harm the frame and lock of your door.
Screwdriver Open the window remove the screw that holds the handle. The screw should be on the inside of the backplate, usually hidden by the cap of the screw for aesthetic reasons. You should not lose any internal parts of the handle, such as the levers and plates on either side. Ideally, keep these in the same order so you can replace them if needed.
Next, turn the handle until it's 90 degrees to the window frame. Finally, loosen the screw at the back of the handle that fixes it to the internal spindle using another screwdriver. Once the screw is loose, take the handle off and remove the broken spindle. Replace it with a new one, making sure it's the same size as the previous one (you will typically find them on the internet or at hardware stores) and screw it securely in the correct position. Do not overtighten the screw because this could cause damage to the handle and window frame.
Ensure the new handle is correctly fitted after which you can close and test the handle. It should work smoothly, and you will be able open your window once more.
Don't forget to double-check that your uPVC window is closing properly while you're working with the handle. If they're not cause damp and draughts inside your home as and also affecting the efficiency of your home's energy usage. A local window company, such as Core Sash Windows, will be in a position to adjust the hinges on your window frames so they shut correctly.
Broken Spindle
It is usually the case that the spindle within the handle breaks, rather than the handle itself. This is particularly common with uPVC tilt-and-turn windows. double glazing window repairs require a handle that acts as an electronic locking mechanism within the window frame. The handle is connected to a central rod which in turn activates mushroom-like locking cams, these secure the frame of the window. If the dead latch mechanism does not open after the handle is turned, it's likely the spindle is broken. This could be a frustrating issue.
Fortunately, there are options to rectify this issue. A reputable locksmith can swiftly and efficiently fix this problem. They can take apart the window handle using a tool that removes the wheel portion of the mechanism that is where the spindle is. This can be done with no damage to the handle or window frame.
After removing the wheel the technician will inspect the spindle and identify the reason for its break. This involves disassembling the spindle and examining every component, observing any wear or damage. This process is usually carried out by technicians working in a clean and safe environment.
The next step is to clean the damaged spindle, this will remove any dirt or other debris that could be hindering its normal functioning. After this the spindle can be repaired or replaced. If it's being replaced, the technician can take a dowel of a similar size to the original and drill mating holes in both pieces of the spindle. This will ensure that the spindle is perfectly matched with the handle.
If the damaged spindle cannot be repaired, it might require replacement completely. Home centers sell generic replacements. However, if the style of your window is rare then you will need to contact a wood worker or cabinet maker who can duplicate the exact model for you. After the spindle is installed, it can be fixed to the handle. Line up the screw holes on the handle to the screws already in the frame. Once the new handle is firmly seated you will be ready to operate your uPVC window.