15 Gifts For The Repairs To Upvc Windows Lover In Your Life
Repairs to uPVC Windows
uPVC windows are a fantastic choice for modern homes. They are easy to maintain, durable and long-lasting. They don't get rotten or rusty like aluminum and timber.
It is crucial to wash and oil UPVC doors and windows on a regular basis. This will save you from costly repairs and increase energy efficiency.
1. Broken Glass
If the glass in your window is damaged, it can cause a great deal of damage to your home, which can make it very dangerous and potentially fatal. It is crucial to take the time to make sure that you are doing everything you can to ensure that your windows are in good condition.
For single pane windows, it is fairly easy to replace windows, and the new one will usually fit inside the frame that was previously installed easily. However, if windows with double panes are held in place by internal beading it will be more difficult to remove the existing panes and install new ones. In this case you'll need find some plastic spacers to assist the new pane to fit perfectly into the frame of the window.
Wearing eye protection and thick gloves is essential if you plan to remove the glass yourself. You should also lay down a drop cloth before you begin working on the window panes, so that any shards of glass fall onto the fabric and not on the floor which could cause them to be trampled under.
It's a great idea to tape the gap once the glass has been removed. This will stop drafts and water from entering your property until a professional comes out to repair the window. This will also act as a barrier that will prevent any intruders from getting access into your home. If the gap between the door and the window is significant, you may need to consider an alarm system that includes a window. This will give you the best of both.
2. Sagging
Upvc windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber sash windows. Over time, they can develop a variety of issues, including sagging. A sagging uPVC window could cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to shrink, it's important to act quickly to stop the issue from becoming worse.
To fix a sagging window you can try repositioning the hinges. First, you'll need to open the windows to access the frame. Then, using a screwdriver, you can unscrew the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you've repositioned your hinges. If you're satisfied with the fit of your window, tighten the screws to keep them in the right position.
If you can't reposition the hinges, you may need to replace the seal. Over time rubber seals can lose their elasticity and dry out which causes their tightness to decrease. It is crucial to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.
UPVC handles can also loosen up. The majority of the time, this is caused by screws that have come loose over time. However, it can also happen because the handle mechanism has been worn out. Fortunately, it's easy to fix the handle of a window that is loose yourself. First, you'll need to close the window and perform a test fit. The joint at the corner of the sash should align with the joint on the casing. If it doesn't, you can make use of a screwdriver to loosen the handle and then turn the mechanism back into its original position.
3. Water Leaks
If you wake up to wet floors and damp walls each time it rains it's crucial to take action. Leaks of water from windows can cause structural damage to your home and also impact your ability to regulate the temperature of your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or not present.
This is a relatively easy fix that can be completed by any DIY expert. Based on the severity of the problem the old caulking may need to be removed before a fresh layer can be put on. When it is time to uPVC repair, it is important to avoid over-caulking. This can make your window more difficult to clean and decrease its energy efficiency.
It is essential to ensure that any drainage holes are free of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious situations, you might have to consider replacing the window.
Other signs of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the walls near the window. This fungus thrives under conditions of dampness and can spread quickly throughout the home.
If the leakage occurs between the double-glazed glass it is more likely the issue is with the seal than the frame. This can be easily fixed by a uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.
4. Faulty Hinges
Hinges could be the reason when your uPVC window is difficult to open or it opens in a breeze. They can be easily replaced by any competent DIYer and are usually completed in a matter of minutes.
Almost every household in the UK will have either top hung or side-hung uPVC windows that are hinged and, just like any mechanical component they will wear out over time. It's easy to replace a hinge on a window but it's much simpler if you have someone to help you hold the frame.
Aldershot window repair is also important to ensure that the uPVC hinges are opened and closed in the right direction. This can be done by looking for the arrow on each hinge. This shows which way the window should be opened.
The problem can be caused by opening the window improperly or by a poor installation at the factory. Sending us photos via our website will often resolve the problem. We are happy to give assistance.
Regularly lubricating hinges is also essential. Applying a light engineering lubricant to the hinges is a great way to do this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also stop corrosion and reduce the possibility of sticking. This should be done at least every year. WD40 and other solvent-based lubricants are not recommended as they could damage parts of your uPVC window.
5. Draughts
Draughts in Upvc windows can be caused by a few various factors. The hinges can also become misaligned due to wear, causing a gap between the frame and sash. This can be easily fixed by giving them a good cleaning, but if they are beyond repair it could be necessary to have them realigned or replaced. The interlock may also become unbalanced. This is located on the hinge side and could require to be cleaned. In some instances, it may be necessary to replace these.
The second most frequent reason for draughts is window seals. These can become worn down or damaged over time and let air escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with low-emissivity glass. which will help regulate indoor temperatures and will lessen draughts.
The final method to cut down on the amount of draughts is to use a draught-excluder. These are typically fabric tubes filled with a filler, which can be placed over your window sill. They will help stop cold air from entering and keep your home warm and cosy!
Your upvc windows can remain a great source of insulation and security to your home with regular maintenance and repairs. However, it is important to recognise that all windows have a lifespan and they may reach an point at which it is more efficient to replace them than fix them. So, if you're experiencing problems with your upvc windows, it is always recommended to seek assistance from a professional as soon as possible.