15 Best Change Door Lock Bloggers You Need To Follow
Reasons to Change Door Lock
There are many reasons to replace your the lock on your door, from increasing your home's security to redecorating your entrance. You may also need to change locks if your key gets stuck or is difficult to turn.
Even DIY beginners can easily alter their locks. Find the necessary materials to begin.
Take off the lock that was previously used.
Removal of the old lock from the door is an essential step before installing the new one. This is crucial if you suspect someone else might have keys to the house. This is also a good idea following you've moved into a new house, had a break-in, or welcomed a roommate. It's much easier than you think and can be done in a matter of minutes.
Begin by getting rid of the screws that attach the deadbolt faceplate onto the frame of the door. To remove the faceplate, you will need to remove screws on both sides. This will allow you to see the hidden screws and give you an understanding of how to continue with the remaining steps.
After you have removed the old faceplate, you'll have to take off the bolt and strike plate. Make use of a screwdriver to loosen the bolt, and then take it out of the hole in the door. If the bolt is rusty, you may have to use a chisel smash it out. If you're using a chisel be cautious not to scratch the door frame.
Before you take down the lock that was previously in use, make sure that the new doorknob and deadbolt fit into the holes in the door. The majority of hardware stores and big box stores carry different kinds of locks and will help you find the right one for your needs. If the lock you bought is not compatible with your door, send it back and seek assistance.
While you are removing the old lock, look for small notches or depressions in the handle or around the trim. If you are able to locate them, insert straightened safety pins or a flat screwdriver in order to remove the handle.
After you have removed the screw from the handle, you can begin removing the knob. To do this, locate the set screw at the knob's base and loosen it. Then, remove the spindle.
Install the new lock
It is a good idea to change the locks on the doors of your home periodically, especially after a burglary or when you move in with roommates. It is easy, cheap and efficient to change the lock on your door. The majority of people can do this themselves with a screwdriver and some basic instructions. You may also want to learn how to rekey your door lock to ensure that only you hold the key.
To start the process, you have to purchase a new lock that matches your existing lock's keyway. Locksmiths are usually able to change the lock's key for a fee, but you can save money by doing this yourself. You can buy a new lock from an hardware store, or online. A standard deadbolt should fit on all doors however, you'll need to measure the size of your door to ensure that it will fit.
Your new lock will often come with a template showing you how to install it on the door. The template can be used to drill the hole. It is much easier than measuring every time. If the template does not exactly match your hole, bring it back to the store and request a replacement.
You must install the new lock on the right-hand side of the door. Verify the latch. It should have a label that says "up" or something similar. Make sure that the latch is correctly seated on the plate, and then attach it using the supplied screws.
When replacing the knob lock, you should also be aware of the handing. Certain knob locks are left-handed. If you are not careful, the knob could be installed on the wrong side of your door, which would make it impossible to lock from the outside or inside.
When you're done, you should test the new lock to ensure it functions. You should be able both to lock and unlock the door using keys from the inside as well as the outside. If you aren't satisfied with the result, you can get an expert locksmith to repair it.
Test the lock
If a lock on your door won't unlock is a hassle and can be dangerous, it could also put your family's security at risk. It's easy to fix the majority of door lock problems by performing some troubleshooting, and lubrication. Make sure that the key is properly cut, and that the lock assembly isn't dirty or loose. If this doesn't solve the issue, try lubricating the door lock actuator using powdered graphite or a silicone-based oil.
Make sure that the door lock switch, wiring harnesses and the actuator connector are working correctly. Refer to the wiring diagram or manual to determine the color-coding and the function of the wires for each door lock switch. Use a test light or digital meter to see whether the door lock's actuator is receiving power and ground when the switches are turned on. If you notice an electric voltage switch on each switch activation, that indicates the switches are good and it's likely the actuator that requires to be replaced.
If the switch seems to work, but the actuator doesn't move when you turn the knob it could be a problem with the actuator itself. The actuator cylinder is loaded with spring pins that stop the cylinder from rotating until the key is inserted, which pushes the pins upward to accommodate the key's height in that location. Eventually, this causes the cylinder to spin and open the lock body and allow the handle to latch.
If the door lock actuator is still not working, you can remove it with a small screwdriver. You'll need to remove the bolt that locks it first and then separate the plastic cover which holds the electrical connector. Then disconnect the door lock actuator and let it fall down. Then you should be able to locate and remove the two bolts that are which hold the actuator in position. After the actuator has been removed and the electrical connector disconnected, you can remove it. black electrical connector.
Replace the key
If you own a keyed deadbolt or door knob if it is not working correctly, you should either reset the lock or replace it completely. It's not difficult to do this yourself and can save you some money. It is best to hire a professional locksmith check the locks for any problems prior to starting. This will give you peace of heart that your home is safe and secure.
To begin, take off the exterior faceplate from the deadbolt or doorknob. There may be screws holding it in place, you need to remove them, use a screwdriver to loosen them, and then pull the faceplate away. Then, remove Repair My Windows And Doors using a flat-head screwdriver. Once you have removed the faceplate you can pull out the bolt and screw from the lock cylinder.
A locksmith can assist you determine if your lock is in need of replacement or changed. They can also advise you on the best security solutions for your home. They can also make any necessary adjustments to the door or frame to ensure that it is a perfect fit. They will also provide an assurance on their work.
You will need to purchase a brand new lock key before you can reset it. It is crucial to select a lock key that is snugly fitted. A key that is not properly fitted could damage the internal mechanism and prevent it from functioning. To determine the size of a key, insert it into the lock. If the key is flush against the plug, then it's the correct size. If the pins protrude out from the top of the plug, they're not long.
You might want to change your door lock for many reasons, including:
If you're moving into a former homeowner's house or lose your keys, rekeying the lock is an affordable option than replacing it. It's also less expensive than a full replacement. Rekeying a lock that is already in use may not be feasible in certain situations. If the lock has been damaged or repeatedly jammed, for instance it could be time to replace it.