14 Businesses Doing A Great Job At Patio Door Repairs
Tilt and Slide Patio Door Repairs
A well-functioning tilt and slide patio door brings fresh air, light and a smooth transition between indoors and outdoor. Modern aluminium doors provide durability and strength and thermal stability, as well as a variety of glass options that can be adapted to the various aesthetics.
One of the most frequent problems for sliding doors is dirty tracks and rollers. Regularly cleaning and lubricating the moving parts can keep your sliding door in good in good working order.
Track and Roller Replacement
Tracks and rollers are primary components of sliding doors. They are housed within the bottom of the door's aluminum panel and sit on a raised track that guides them as they open and close. Over time, dirt in the tracks could cause them to become blocked. This can lead to the rollers becoming damaged. Keeping your patio door clean and well-lubricated will help avoid these issues.
Unless your track is severely bent, it is usually possible to repair the track and rollers, without removing the door. You can ask a friend to assist you in lifting the panel off the track by tilting it toward you (Photo 3). This could take some effort as the panels are heavy. After the panel has been removed, lay it flat on the sawhorses and examine the rollers. Replace them if they are damaged by purchasing a new set. You can also alter the height of the rollers by turning adjustment screws- typically located in slots on the edge of the door panel.
If the rollers appear to be in good shape, they may only need to be cleaned and lubricated. Use a screwdriver for removal of the rollers and clean each one with denatured alcohol. This will eliminate any caked-on dirt or grime that might be creating resistance. After carefully positioning each roller in its slot, fully retract it by using the adjustment screw. And lastly spray the rollers with silicone spray. This type of lubricant won't hold dirt like petroleum-based products and will help your door to glide smoothly.
After cleaning and reinstalling rollers, you can test and reinstall the door to make sure the track is properly aligned with the rollers. Also, ensure that the doors slide smoothly. Contact a local dealer if you need assistance. Keep your doors clean and well lubricated to extend their life and decrease the need to repair. We recommend a silicone-based lubricant because it won't attract dirt the way that WD-40 does. It is recommended that you apply lubrication to your rollers and tracks at least once a month.
Insect Screen Replacement
Patio doors that slide open are a great way to maximize floor space, create airflow and allow in beautiful panoramic views. However, they can be a problem when the mechanism isn't functioning properly or has stopped moving altogether. Fortunately, most issues with sliding screen doors are easily fixed. Dirty rollers caused by debris in the track or a wrinkled window are among the most frequent issues. However, you can fix them by following these easy steps.
If your screen is sliding or is wrinkling, first place the frame on a flat work surface and slide a 1x4 block underneath each end to create an elongated bow in the middle. This will allow the screen to be pulled tighter and straighten it.
Make sure sliding patio door repair purchase an alternative screen that is at least a couple of inches bigger than the frame's opening in both directions. You'll be able to trim any excess. Then make use of a spline roller tool to press the rubber spline end into the channel. After you've done this, it's time to add the rest of your spline.
Adjusting the Panel
In contrast to traditional sliding doors that open by turning the handle, tilt and slide patio door mechanisms permit you to leave the doors wide open for ventilation while keeping the kids or pets away from your home. Despite the convenience of the system, they tend to take more force than anticipated and, over time, this leads to increased friction, crooked tracks, or misalignments that could cause the door to fail. Finding these issues early and making minor adjustments will often solve them, thus reducing the necessity for expensive replacement hardware.
The first step to adjust a tilt-and slide patio door is removing the panel. Set it on a flat surface. After removing the panels, employ a screwdriver to take the plastic caps from the holes of each adjustment roller. Once they are removed, the adjuster can be coaxed out of its channel using the long shaft screwdriver. Once the adjuster is removed and placed on a flat surface and clean it using rubbing alcohol or a stronger variant like denatured alcohol. This will remove any dirt that is causing the roller to become resistant and allow it to retract back into its channel after the process.
When you are reinstalling a moveable panel, align it with the frame and use the drill to drive the screws into the flange. Attach the flange securely to the door's edge, making sure that the flaps are oriented correctly. Once the movable panels are in place apply silicone-based lubricant onto the top track block for the arm connector, the lead Bogie wheels and the slave Bogie wheels and replace the cap on the hole made of plastic.
Repeat the process for the remaining two movable panels in order to restore their slide function. Install the plastic flanges. Finally, glue the jamb side strip to the equivalent fixed panel using a plastic adhesive. Reattach the handle once the glue is dry and examine the smoothness of the operation. If there are any issues, adjust the lead Bogie wheel by getting it removed from its channel, cleaning it and reinstalling it with a bead of silicone-based grease.
Charley Bar Installation
A patio door can be an efficient way to let your pet in and out of your home, but it also serves as an entry point for burglars. You can increase the security of your patio door by putting in pin locks or an charcoal bar. These devices provide a mix of convenience and security that is unmatched by any other product on the market.
The charley bar is an excellent alternative for your sliding glass door, and can be easily installed at your home. The charley bars can be placed in the middle of the door to avoid the patio door being jimmied with objects or tools such as a hockeystick or broom handle. The charley bars are constructed from injection-molded polycarbonate tubes and extruded RPVC tubing, which makes them durable and strong.
The installation of the charley bars requires you to first take a measurement of the length of the bar from the edge the sliding door track to the sliding patio door. Then, you can mark the points where the charley bar is going to go using a pencil. Use an eighth-inch drill bit to make holes in the wall jamb and frame of the patio door, being cautious not to cut through the patio door glass. Then you can tighten the screws that came with the charley bars.
The charley bar is an excellent option for sliding glass patio doors and windows made of sash. This simple security tool will keep your sliding patio doors secure and burglar-proof for many years to come. It is made of polycarbonate that has been injected and has been tested by Intertek to withstand more than 400 pounds of pressure. The charley bar is locked with the key included. It is simple to set up, and it hangs away when not being used. You can buy the charley bar at most hardware stores. If you are looking for a charley bar that works, purchase it from an online retailer.