11 Ways To Destroy Your Saab Key Fob Programming
Saab 93 Key Fob Replacement
Saab key fobs with 93 keys are costly to replace. However, the process is very simple.
You will need a flathead phillips screwdriver, and some patience. Place the screwdriver in the middle of the case, and then slowly open it.
Having spare fobs and keys is an excellent idea. They can save you from being stranded or having to pay towing charges.
How to replace the battery
Key fobs in all cars that lock and unlock the vehicle remotely have an internal battery which will eventually die. With just a few steps, users can replace the battery in their key fob. To remove the battery that was in the key fob and replace it with a brand new one, you need to open two flaps made of plastic on the opposite side. The replacement battery is a standard CR1632 coin cell and the procedure to install it is easy.
Once the emergency key has been removed, you can use a small flathead screwdriver to cut the case of the remote fob. Don't force the case too much as the electronics are delicate and can be damaged by excessive pressure.
Saab produced some stunning automobiles. Many of them remain in existence today. The ignition keys are among the most problematic aspects of these automobiles. They're not very durable, and the keys may become spongy or break off over time. If an Saab owner loses their only functioning key, it could be costly to purchase an additional key at the dealer, because they'll need to replace the entire computer module, and then program it to the new key to convince the car that you're not trying to take it. The good part is that you can save a lot of dollars by simply replacing the case instead.
How to remove the manual key
Key fobs that lock and unlock a car contain batteries and they do have a time-limit. If you're like the majority, yours will die at some time. It's easy to replace the batteries that you can use to operate the key fob manually. The only problem is taking the old one from the case, but it's nothing a little patience and a bit of work using a flathead screwdriver won't assist you with.
After you've installed the new battery, it's time to put everything back together. To accomplish this, you'll have to open up the replacement key fob's case. This can be done by inserting a flathead screwdriver into the slot in the middle of the case. Then, gently work the case until it splits, then you can take it off of the key fob.
You may have to reprogram the new key fob if the previous key fob has lost its connection to the security system of your car. This can be done using the manual learning procedure for adding a brand new FOB to your 2010 Saab 9-5. This method DOES NOT cause the loss of previously learned keys. You can continue to use the existing FOBs if you have to re-program them. To begin this process the FOB that is to be programmed must possess the mechanical key cut to match that of the vehicle.
How to Resolve the Case
It's a great idea to replace both the case and battery whenever you're replacing the manual key or battery. The cases get worn out quickly, especially after prolonged use. It's easy to replace the case of your SAAB 9-3, and you won't need any special tools.
To replace the case, you'll need to first remove the manual key from the key fob. This can be done by pressing the SAAB logo and pulling out the manual key. The fob of the key can be a bit sticky, so it might require a amount of force to pull the key out.
After you have removed the manual key from the case, you can begin to remove the electronic components. To do this, you'll require a small flathead screwdriver. Use a gentle screwdriver so as not to harm any electronics. After The Keylab 've removed all the electronics, it's time to take the battery out. After you've replaced the battery, you can put everything back together in a new case. You can buy cases online at an affordable price.
How to program the New Key
Key fobs that allow you to lock or unlock your vehicle remotely, are equipped with batteries. However they have a short lifespan. It is crucial to keep in mind this and replace the battery in your key fob at least every three to four years. This is an easy task that you can carry out at home. All you need is patience and a small flathead phillips screwdriver.
First, remove the manual key. You can do this by pressing the blue SAAB logo on the fob of your key and pulling the emergency key out. It may require some force but the key will come out easily. After you've opened the key fob, you are able to remove the battery by gently pressing the screwdriver in the slot that is in the middle. This will split the case and make it easier to access the electronics.
It is now time to program the key. This can be accomplished by following the steps in this YouTube video from YouTube Cyclone Cyd user. Cyclone Cyd's channel on YouTube provides excellent tips on how to do simple maintenance and repairs on cars.
A key fob can be an ideal way to store an extra car key in case you lose or break your original. You can purchase a new keyfob through the internet or from a local locksmith such as United Locksmith. The cost is much cheaper than at a dealership, which will charge you for the key and programming it to your car.