11 "Faux Pas" That Are Actually Acceptable To Make With Your Replacement Door Handles
How to Replace Door Handles
The door handles that you have in your home are an important element of your design. A new handle will elevate your space and bring your decor to the present.
As time passes, your knobs on your doors may begin to feel stiff and even break. These are indicators that it's time to replace them. This guide will help you choose the correct door handle replacement for your home.
Door Knobs
The handles on your doors can enhance the appearance of your house and make it easier to open and close them. They come in a wide variety of colors, finishes and types to match your decor. If yours is beginning to show signs of wear or require an upgrade You can replace them in a few simple steps.
The first thing you need to do is locate the shaft or spindle through which the knob is affixed to the door. Some knobs have a small opening that you can use a screwdriver for removal of the set screws that secure the handle. Some have a thin slot, or hole, that you can use to press an activated detent pin that is spring-activated using a flathead. When you press this pin it opens the latch mechanism and lets you pull or push on the knob.
Once you have the spindle or shaft in your hand Remove the knob and replace it. Be sure to align it properly and then test to see that the latch works properly before tightening your new set screws.
After replacing the knob, place the rod that is attached to the latch over the hole on the door. Secure it by securing it to the rod system on the second knob. Make sure that the holes are lined up, then thread in the screws for the latch plate and tighten the screws.
Some people choose an brushed or smooth metal finish for the door hardware to give their home a sleek and contemporary style. This will match their other furniture. Others prefer a more rustic look that is a good match for farmhouse-styled spaces. If you have one of your family members with mobility issues, you may want to choose the lever or rim lock that require less pressure to operate.
While aesthetics have traditionally been the primary consideration for door handle design, other factors are being taken into consideration as well. Infection control and accessibility are the main issues that have led to the creation of new designs for handle handles including ones that can be operated with the forearms of a person.
Latch
The latch that holds the door handle open can wear down as time passes. It is simple to change the latch on your door handle. This will make huge differences in how it opens and closes.
Depending on the kind of knob you have depending on the type of handle you have, the latch may be part of the knob itself, or it could be an individual piece that is attached to the door. In any case, you'll follow the same steps for removing and replacing. It's simple to remove the old latch, especially when you have doors with a "magic" button. The button is located on the left side of the knob, this little pressure-slot is what you need to press to pull the latch out of the handle and out of the latching mechanism.
If your handle does not have this magic button, the first step is to remove any cover plates that sit over the latch plate. These are usually circular or rectangular and can be removed by using a screwdriver in order to remove them off of the handle. Some have a small slot inside that you can slide your screwdriver through, while others simply snap off.
The next step is to remove the two machine screws that hold the latch and inner plate to the door handle. These are the screws with a pointy tip You will have to store them in a safe location to reuse them in later steps. Once the screws are removed, you can take the latch plate and mechanism out of the hole in the door and put it away.
Now you can begin installing the new latch. Place the latch plate in the door hole and secure it using the hardware provided. Make sure door handle repairs that is on the interior of the latch is facing the mechanism for latching inside the handle and that it is lined up with the other screw chambers of the door handle. Then, push the exterior latch plate on and secure it with the screws supplied.
Strike Plate
One of the most common reasons for replacing the door handle is because it is loose or doesn't lock properly. This is often due to incorrectly aligned parts in the latching mechanism, like a strike plate that's too small or has moved upwards or downwards on the doorjamb as time passes. This project allows you replace your old strikeplate with a longer one, which will provide more security for your door and keep it closed.
To check if the problem is caused by the strike plate, apply some lipstick or similar marking material on the bolt that is used to latch. Close the door and try to latch it. If the mark is lower than your strike plate hole, it indicates that the plate is too small and the door will not latch. If the mark is above the strike plate hole, it's most likely that the strike plate has been moved up or down the doorjamb.
Depending on your door You may be able to just screw the new strike plate in the door over the old one with the screws included with it. You may need to first drill holes and then chisel the wood to ensure a tight fit. If this is the case Be careful not to be too rough with the chiseling process or you may ruin the integrity of the doorjamb.
You can also try installing a new strike plate which gives the lock a much stronger hold on the door and requires more force to open it. Typically it requires two long screws to secure the strike plate to the frame of the door. You'll have remove the old strike plate and then drill and chisel the wood to make room for the new one.
This rare strike plate is made of solid brass and comes with a heavy-duty thickness. It's specifically designed to be used with antique rim locks. It comes with both machine screws and wood screws, ensuring that you have the right equipment for your task. Just remember that wood screws have a sharp edge, whereas the machine ones are more blunt.