10 Websites To Help You To Become An Expert In Replacing A Window Handle
Tips For Replacing a Window Handle
It is easy to change your window handle from the comfort of your home. Follow these tips to ensure a smooth and beautiful finish.
Remove the screw covers from your uPVC handle to expose the screws. Make sure you measure the spindle in order to make sure you're getting the correct size replacement.
1. Measure the Spindle length
It is essential to ensure the correct size of the spindle when replacing windows handles. This is because it could affect how tight or loose the handle is and whether it's able to lock properly within the frame of the window. The spindle is a steel shaft that connects the handle to the lock on the frame of the window. The spindle can be either a standard 8mm cross-section in the industry or older 9mm versions. The modern industry standard is 8mm but this wasn't always the case so when buying a new handle it's essential to check the dimensions.
The easiest method of measuring the length of the spindle is remove the handle that is currently in place and this can be done by turning it into an open position and unscrewing the two screws (which might be hidden behind plastic caps that need to be removed) which hold the handle. After the handle is removed, measure the distance from the base to the end. This will give you the measurements needed to purchase a replacement.
There are many options when it comes time to choose the perfect window handle. From sleek chrome that can fit into modern homes to traditional burnished bronze that looks beautiful in restored Georgian rooms, or the more classic Tudor cottages with curled mongoose tail latches. The options are endless but the most important thing is to choose a style that suits your home.
Espag handles are typically installed to uPVC window frames and are always the exact same size with a 43mm central. repairmywindowsanddoors are available in a range of sizes, ranging from 58mm up to 62mm. Window handles made of Cadenza are different in size since they have an angled blade which operates with a multi-point locking mechanism within the window.
When choosing a window handle, you should also consider the hand you use to open your door. Inline Espag handles can be used with either left or right-handed windows. Cranked window handles can only be used with windows that are open in one direction.
2. Remove the Handle
Whether the handle is damaged or simply worn out, a window handle that is shattered can be very frustrating. The good news is, you can fix the uPVC handle by yourself. All you need is the most basic tools and a bit of time to complete the task.
First, you must open the window and ensure that it is not locked. The next step is to remove the screws which hold the handle in place. Once these are removed, you are able to work on removing the handle itself.
The handle is attached to a spindle inside the window frame. It is fixed by either a screw or pin dependent on the kind of handle. The most popular types of handles are inline Espagnolette handles and handles with cockspurs. Both of these kinds of handles are used on casement windows, as well as windows made of aluminium. The handles can be locked with a key in order to block access by unauthorised persons from the outside. Or you can lock the handles by turning them clockwise.
To take the handle off, you'll need a screwdriver with a flat blade to remove the clip that holds the handle in place. After the clip has been released, the handle should slide off the spindle. After the handle is removed, you'll need determine the length of the spindle and make sure that your new handle is a good fit.
Once you have decided on the proper size for the handle, you can screw it into the correct position. You will need to make sure that the new handle is securely attached and that it turns in the correct direction (clockwise for open and counterclockwise for closed). It is also important to check that it isn't installed upside down.
Replace the cap screws. Once you've completed this step, you are able to test the handle to be sure that it's working properly. You can also test the locking mechanism by shifting the handle from the unlocked position to the locked position and then back.
3. Take off the Screws
A uPVC handle is an essential element of any home and is the first thing to show signs of wear or damage. This could be due to natural causes or from frequent use, and sometimes deliberate damage by opportunistic criminals who seek to open a closed window to gain access to your home. A simple repair can fix the issue and stop it from repeating itself.
uPVC handles can also be difficult to open when the locking mechanism isn't functioning correctly. It's usually possible to resolve the issue by replacing the multipoint locking mechanism instead of the entire handle. This could save you money.
Once you've removed the old handle, you'll need to remove the screws that were holding it in place. The screws are typically located on the inside of the handle's base. You may require a screwdriver for this and it's important to not over tighten the screw as this could cause the handle to loosen.
Then, you'll need to find the screws or pins that secure the handle. Again these are likely to be located on the inside face of the base of the handle. you'll need either a screwdriver or pair of pliers to take them off the screws. After they've been removed, you'll need to replace the screw caps if you wish to do so, and then test the new handle to confirm that it's working correctly.
Install the handle by aligning the spindle to the window's cutout mechanism. Then, screw it in. Make sure the handle is in an open position and that any screws are tightly fixed before replacing the screw covers should you wish to do so. Once this is complete you're done and can enjoy your new window handle. This should allow you to avoid expensive window and door replacements in the near future. If you'd like to get more assistance with this or any other aspect of your uPVC windows do not hesitate to contact us.
4. Fit the New Handle
If you're replacing a damaged handle or simply updating it, the process is surprisingly easy and can be accomplished in just a few steps. The first step is to determine the kind of handle, take measurements of its spindle, and determine what tools you'll require to complete the task. Safety is always the top priority when working with tools and windows. It's also important to be patient and follow the steps to ensure you have a functioning handle that is safe to use.
The first step is to identify the screws that hold your existing window handle in place and remove them, while keeping an appropriate grip on the handle itself to stop it from falling suddenly and injuring yourself. After the screws have been removed they can be repositioned in a safe spot to be replaced in the future.
After the handle that was used previously is removed, you can now begin fitting your new handle. It is important that the handle is fitted perfectly to ensure that it functions correctly and locks the window in position. Next move the square metal bar on the handle into the hole for the window mechanism.
The final step is to replace the screws caps and then test the handle to ensure that it works. If you aren't satisfied with the outcome or if the window does not open and close as it should then the next step is to contact our experts who will be able to help.
Almost all homes in the UK have uPVC windows, and as they are, a lot of them will have to be replaced at some point because of wear or damage. The procedure is simple and can be done by anyone with a bit of knowledge of DIY. The most crucial aspect to the success of the process is to ensure that you're using a handle that matches the window's size and design. Contact us if you are unsure of the type of handle you require. They'll be able guide you through the choices.