10 Things We All We Hate About Replacing A Window Handle
Tips For Replacing a Window Handle
The replacement of your window handle is a simple project that can be completed from the comfort of your own home. Follow these steps to ensure an elegant and smooth finish.
Start by removing the screws to expose the screws inside your uPVC window handle. Measure the spindle's length to ensure that you get the correct size replacement.
1. Take a measurement of the Spindle Length
When you're replacing a window handle, it's important to get the size of the spindle right. It could affect the tightness or looseness of the handle and whether the handle locks correctly into the window frame. The spindle is the metal shaft that connects to the handle and to the lock in the frame of the window. The spindle can be either a standard industry 8mm cross-section or the older 9mm versions. The modern industry standard is 8mm but this wasn't always the case so when buying a new handle it is important to check the measurements.
The easiest method of measuring the length of the spindle is remove the existing handle and this can be done by turning it into the open position, then unscrewing the two screws (which could be hidden behind plastic caps that have to be removed) which hold the handle. Once removed measure from the base of the handle until the end of the spindle. This will give you the measurement needed to purchase a new one.
There are many options available when it comes time to choose the perfect window handle. From sleek chrome that can fit into a modern home to traditional burnished bronze that looks beautiful in restored Georgian rooms, or even the more quaint Tudor cottages with curled mongoose-tail latches. The options are endless but the most important thing to do is choose a style that suits your home.
Espag handles are typically installed to uPVC windows and are always the same size with 43mm centres (2 fixings). Cockspur handles are available in a variety of sizes, starting at 58mm up to 62mm. Window handles made of Cadenza are a different size since they have an angled blade which operates a multi-point locking mechanism inside the window.
Another aspect to consider when selecting the right window handle is knowing what hand you need, this is simply defined by what hand you use to open the door. Inline espag window handles are not handed and can be utilized for left or right handed windows. Cranked window handles are only compatible with windows that open in a single direction.
2. Take the handle off
A window handle that is sagging can be frustrating, regardless of whether the handle has been damaged or worn out. The good news is that you can fix a uPVC handle by yourself. You'll need only the most basic hand tools and some time to complete the task.
The first step is to have to open the window and make sure that it is in an unlocked position. The next step is to remove the screw caps which hold the handle in position. Once the screw caps are removed then you'll be able to remove the handle.
The handle is connected to a spindle within the window frame. Based on the type, this is held in place with a screw or pin. repairmywindowsanddoors of handles are inline Espagnolette handles and cockspur handles. Both types of handles are available on casement windows including aluminum ones. They can be locked using keys to prevent the opening of the window from the outside or by locking them by turning the handle clockwise.
To remove the handle you will need to use an screwdriver with a flat blade in order to remove the clip that holds the handle. After the clip has been released, the handle will slide off the spindle. Once the handle that was previously used has been removed, you'll need to measure the spindle length and make sure that the new handle will fit.
Once you have the correct size, you are able to fix the new handle into place. It is essential to make sure that the handle is securely attached and that it rotates in the proper direction (clockwise when the handle is open, or counterclockwise if the handle closes). It is also essential to ensure that it has not been installed upside down.
Finally, you should replace the screw cover caps. After you've done this you can test the handle to make sure that it functions correctly. You can also test the locking mechanism by moving the handle from the unlocked position to the locked one and then back.
3. Remove the Screws
A uPVC window handle is an essential part of any home and is usually the first thing to exhibit signs of wear and tear or damage. This could be due natural factors, regular use, or even damage caused by criminals looking to gain access to your home. But, a simple fix will solve the issue and stop the issue from recurring.
uPVC handles may also be difficult to remove if the locking mechanisms aren't functioning properly. Most of the time, the issue can be resolved by replacing the multipoint lock, rather than the entire handle and it's definitely worth a look as it can save you money.
Once you've removed your old handle, you'll need to remove the screws that were that held it in place. The screws are typically located on the inside of the handle's base. It may be necessary to use a screwdriver do this. Be careful not to tighten too much the handle since this could cause it to become loose.
Then, you'll have to find the pins or screws that secure the handle. They are typically located on the inside of the base of the handle. You will need an instrument to remove them. If you'd like to, you can replace the caps on the screw and check the handle to ensure it functions properly.
When you're ready for installing the new handle, simply align the spindle with the cutout in the window mechanism and screw it in place. Make sure the handle is in an open position and that the screws are securely secured prior to replacing the screws' covers, if you wished to do this. It's done! You can enjoy the newly installed window handle. We hope this will allow you to avoid having to pay for costly replacement of your door and window in the future. If you would like more assistance with this or any other aspect of your uPVC windows do not hesitate to contact us.
4. Install the new handle
The process of replacing a broken window handle or updating it is simple and can be completed within only a few simple steps. The key is to identify the type of handle, determine its spindle and know what tools you'll need to complete the job. Safety is always the top priority when working with windows and tools. Make sure you follow the steps and make sure that you have the right handle for use.
The first step is to identify the screws that hold your existing window handle in place and take them out, while maintaining a safe hold on the handle itself to prevent it from crashing and causing injury. After the screws have been removed, they can be placed in a safe spot to be replaced later.
After removing the old handle, you can now begin installing your new handle. The handle needs to be perfectly positioned in order to function correctly and secure the window in its closed position. The next step is to slide the metal square on the back of the handle into the hole in the window mechanism, ensuring that it fits securely.
The final step is to replace the screws caps and test the handle to ensure that it works. If you're not happy with the results or if your window does not open or close correctly contact our experts for assistance.
The majority of homes in the UK have uPVC windows. As so, a large number of them will have to be replaced in the near future due to wear or breakage. Anyone with some DIY experience can easily complete the task. The most important factor in the success of the process is making sure you're using a replacement handle that matches the window's dimensions and style. Contact our team if you aren't sure of the kind of handle you require. They'll be able to assist you with all of the possibilities.