10 Startups That'll Change The Repairs To Upvc Windows Industry For The Better
Repairs to uPVC Windows
uPVC is a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. They don't rot or rust like aluminum and timber.
Regularly cleaning and lubricating UPVC windows and doors is crucial. This will reduce repair costs as well as increase energy efficiency.
If the glass in your window has been damaged, it can cause a huge amount of damage to your home, making it extremely dangerous and possibly fatal. It is important to make sure that your windows are in good condition.
For single pane windows it can be relatively simple to replace windows, and the new one is usually able to fit into the frame that was previously installed easily. If you have double-paned windows which are held together by internal beading, it will be harder to remove and replace the old panes. In this instance, you will need to source some plastic spacers to aid the new pane in being able to fit properly into the frame of the window.
Wearing protective eyewear and thick gloves is essential for anyone who plans to remove the glass yourself. You should also lay down a drop cloth before you begin working on the window panes so that any shards fall on the fabric and not onto the floor, where they could be trampled.
Once the glass has been removed and the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to block water and drafts from entering the property until a professional can come out and fix the window. This also serves as an obstacle to stop intruders from making their way into your home. If the gap between the door and the window is significant, you may prefer security screens that includes windows. This will provide the best of both.
2. Sagging
Upvc is a long-lasting and energy efficient alternative to timber sash windows. However, over time they are susceptible to a range of problems including sagging. A sagging window in uPVC can cause issues with light, draughts and even security. It's crucial to act when you notice your uPVC windows are sliding.
Repositioning the hinges can aid in fixing a window that is sliding. To do this, you'll need to open the window to get to the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after you have relocated your hinges. If you're happy with the fit, tighten the screws to ensure that they stay in the right place.
If you cannot reposition the hinges, you could need to replace the seal. Rubber seals may dry out and lose their elasticity with time, which causes them to lose their tightness. If this happens, it's crucial to replace the seal as fast as you can to ensure that your uPVC windows are watertight and safe from drafts.
UPVC handles can also become loose. This is usually due to screws that have become undone over time, but it can also be due to the handle mechanism wears out. It's a good thing that it's simple to fix the handle of a window that is loose yourself. First, you'll need close the window and perform an initial test fit. The joint at the corner of the sash should be aligned with the joint on the casing. If it doesn't, you can use a screwdriver to loosen the handle, and then reverse the mechanism back into position.
3. Water Leaks
If you're waking up to wet floors and damp walls each time it rains it is important that you take action. Water leaks through windows can cause structural damage to your home, and hinder your ability to control the temperature inside your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.
It is a fairly easy fix that can be completed by any skilled DIYer. Based on the severity of the issue the old caulking might need to be removed before a fresh layer can be applied. When it is time to uPVC repair, you must avoid over-caulking. This will only make your window more difficult to clean and lower its energy efficiency.
Check that any drainage holes do not have debris inside them and ensure that the sill pan has been properly angled to allow the water to drain from the window. In more extreme instances, you may need to replace the window.
Mold spots and rotten sills are also signs of water leakage. The mold thrives in damp environments and is able to quickly spread throughout the home.
If the leakage is occurring between the double-glazed window, it is more likely that the issue is more with the seal than the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.
4. Faulty Hinges
Hinges could be at fault when your uPVC window is difficult to open, or if it blows open with the breeze. They can be replaced by any competent DIYer and are usually done within a few minutes.
Like all mechanical parts hinges are prone to be damaged over time. Changing a window hinge is essentially a simple process but it can be easier to do when you have a person to assist in holding the frame up.
Check that the uPVC hinges open and close in the right direction. You can do this by looking for the arrows on each hinge. This indicates the direction in which the window should open.
Window hinges that aren't working properly can be caused by incorrectly opening the window a certain way or due to poor installation at the factory. Sending us a photo via our website is often enough to solve the issue. We are happy to provide advice.
It is also crucial to grease the hinges regularly. Applying a light engineering lubricant to the hinges is a good method to accomplish this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also lower the chance of windows sticking and prevent corrosion. This is recommended to be done at least every year. WD40 and other solvent based fluids are not recommended since they can damage the parts of your uPVC window.
5. Draughts
Draughts in upvc windows can be caused by a variety of different factors. The hinges can also be unbalanced due to wear, which can cause a gap where the sash and frame meet. If they are damaged beyond repair, it could be required to realign them. The interlock, which is located on the hinge of the window, may be misaligned. Again, it's possible to just give them a clean but in some cases it might be necessary to get them replaced.
These seals can wear down or be damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping will help to stop draughts. Replace the windows made of Upvc with low-emissivity glasses. This will help to regulate indoor temperatures and decrease draughts.
The last way to reduce the amount of draughts is to use a draught-excluder. These are usually made of fabric tubes filled with a filler which can be placed over your window sill. They will help block out cold air and keep your home warm and cozy!
Your upvc windows can keep providing excellent insulation and security in your home by performing regular maintenance and repairs. It is crucial to realize that windows last for a certain period of time and there may come the point when it's more cost-effective to replace them rather than fix them. So, if you are experiencing issues with your Upvc windows, it is best to seek professional assistance immediately.