10 Quick Tips About Upvc Front Door Lock Replacement
UPVC Door Lock Replacement
UPVC doors can be an excellent security measure against burglaries. However the advantage have a few limitations that can be addressed by installing deadlocks.
If your uPVC front door lock is loose or floppy, it may be time to change the barrel lock. This easy DIY project will improve the security of your home and improve its appearance.
The old lock cylinder must be removed.
If you're finding that your front door feels flimsy when you lock it or that the key is struggling to turn, you might have a damaged lock cylinder. Replacing it will ensure that it operates smoothly and improve security. The procedure is easy and should take about 30 minutes. You'll require an screwdriver. To begin by opening your door, look at the edge near the lock the cylinder. You will see a screw there that is roughly in line with the bottom of the cylinder. Take it off using the help of a screwdriver, and store it in a safe place.
You will need to know the exact size of the cylinder that you currently have to locate an appropriate replacement. The sizes generally range from 60mm up to 110mm. To determine the size of the lock, you'll have to remove the faceplate screw. You may also try to turn the lock handle with the key when the cylinder is in place to determine how much it shifts in each position.
The next step is to determine the cylinder cam's diameter and diameter of the cylinder. These measurements will ensure that the new lock will fit the existing door. These dimensions can vary depending on the type of uPVC. You'll need to choose the replacement cylinder which is similar in size or slightly bigger than the one that is currently in use.
After you have the measurements, it is time to take down the old door cylinder. It's an easy task but you need to perform it properly to avoid damaging your door or frame. Also, make sure the door is propped open or secured securely so that it doesn't close between steps.
A professional locksmith could be an ideal option if you don't feel like doing it yourself. They can provide expert advice, flawless execution, and peace of mind. They can also help you choose a safe and secure locking system. DIY can be a good method to save money and learn new skills. All you need is a little patience and the right tools, such as a Phillips screwdriver. The process of changing your uPVC lock isn't as daunting as it seems.
Installing the new lock cylinder
When you are replacing the lock on your front door, it is crucial to take the correct measurements and follow the steps to make sure that the new lock is installed correctly. This will not only prevent future issues, but it will also increase the security of your home and allow you to use keys from both sides of the front door. Before replacing your uPVC lock, you must take measurements of the overall length and of the backset and cylinder diameter. These dimensions will ensure that the new lock cylinder is able to fit inside the uPVC frame and functions properly without gaps or security issues.
The first step of the process is to take off the door handle by loosening the screws that hold it using a screwdriver. The next step is to take off the barrel screw that is holding the lock of the cylinder. You can then take out the lock that was previously in place by inserting the key into the cylinder and turning it both left and right. When the key is in either of these positions you should be able to take off the cylinder by wriggling it out of its slot.
Installing the new cylinder in the front door is relatively easy and will involve the same steps you used to remove the old one. However, you must be aware that the cylinder won't fit in the same space that the previous one was. The cylinder has to be aligned correctly in order to be locked and closed using a key. Make sure that the cylinder is in the center and has a circular keyway.
It isn't difficult to install an entirely new uPVC door lock, however it is important to be careful not to damage the door frames or handles. If you have any doubts regarding your ability to complete the task it is best to hire an experienced locksmith who is Checkatrade Approved and has worked with these kinds of doors. A locksmith will save your time and money by finishing the job quickly and efficiently.
Attaching the door handle
There are many reasons you could want to alter the lock on your front door. You might have lost a lock key or the previous tenant has not returned the keys, or you wish to upgrade to a more secure lock. It takes just five minutes to replace the lock barrel of the uPVC front door. You'll need a Phillips head screwdriver and a new lock cylinder and an extra key for the cylinder (if you're planning to use one). Make sure the door is propped up or secured to ensure that it doesn't close during the process.
It's not as hard as you might imagine to replace the lock mechanism on a uPVC door. Begin by determining what kind of lock you have on your front door, then determine the size you'll need to replace. For older doors, there are strip locks as well as multipoint lock options. It's much easier to replace your uPVC door lock if you know the brand and type it is.
After you've replaced the cylinder, it's time to connect the door handle back to it. The first step is to loosen the set screw that holds the handle's spindle shaft with either a screwdriver, or Allen key. Then, take the handle off to reveal the spindle shaft. If the shaft is threaded, you'll need to loosen it a bit before backing it up using a screwdriver in order to ensure proper fit.
Test the lock after having tightened the screws and the lock cylinder. Make sure that the key turns easily and fits well and that the locking mechanism of the handle is operating well. If you're not comfortable doing this yourself, a locksmith can do the job for you.
It's also important to note that uPVC door handles and lock mechanisms require regular lubrication to ensure their functions. This is especially applicable in areas that experience high wear and tear like those that are frequently used or shut and locked. A small amount of lubricant will go a long way towards prolonging their life and ensuring they function correctly.
Testing the new lock
A Upvc lock is an essential element in the security of your home. However, like any other device it is susceptible to wear and tear over time or be damaged. The key to a functioning uPVC lock is regular maintenance. This will prevent issues from popping up and could compromise the security of your home. The best way to accomplish this is to lubricate the internal mechanisms using an approved lubricant every six months. This will keep the lock from rusting and causing damage.
Aside from the regular oiling, you can use a silicon-based spray to loosen the keyway and make it easier to insert the key. This is a quick DIY solution that will save you money over time. Be sure to not use WD-40because it can leave oil residue behind which could cause damage to the lock.
Once you have installed the new cylinder, it is essential to test it before you decide if it functions correctly. This can be done by testing the handle from both the inside and outside the door. You can now put the handles back into place and re-insert spindle screws if everything is in order. Then, re-insert those screws that secured them and give yourself a pat on the back for a job well-done!
A locksmith can also install additional features to improve the security of your home, for example door chains or sash jammers. They can help you select the best locks for your house. A professional can also assist you in determining the ideal size of cylinder for your doors, which is vital because a poorly-matched lock could compromise your security.
The cost of replacing a uPVC lock varies based on the type of lock used and the number of doors that need to be replaced. The average cost for a professional locksmith ranges between PS75 and PS100 per hour. However, the price can change depending on the location you reside in and the kind of lock you need. Check out locksmith prices before selecting the best firm.