10 Misconceptions Your Boss Holds About Replacing A Window Handle Replacing A Window Handle
Tips For Replacing a Window Handle
Switching the handle on your window is an easy project that can be completed in the comfort of your own home. Follow these steps to ensure an elegant and smooth finish.
Start by removing the screw covers to expose the screws inside your uPVC window handle. Make sure repairmywindowsanddoors.co.uk measure the spindle in order to make sure you're getting the correct size replacement.
1. Take a measurement of the length of the Spindle.
If you're replacing a window handle it's crucial to determine the size of the spindle correctly. This is because it will affect how tight or loose the handle is and whether it locks correctly in the frame of the window. The spindle is the steel shaft that connects the handle as well as the lock in the frame of the window. The spindle is available in the standard 8mm cross-section for industry or the more traditional versions of 9mm. The current industry standard is 8mm however this was not always the case. When buying a new handle it's essential to check the measurements.
Take the handle off. This is easily done by turning the handle in the open position, then unscrewing two screws that hold the handle in place (which are usually hidden behind plastic caps which are required to be removed). After removing the handle, you can measure from the base of the handle to the end of the spindle. This will provide you with the measurements required to purchase a replacement.
There are many choices when it comes to choosing a new window handle, from sleek chrome that fits in with a modern home, to traditional brass with a burnished finish that looks great in restored Georgian rooms or even the more classic Tudor cottages with curved monkey tail latches! The possibilities are endless, but the most important thing is to choose a style that complements your home.
Espag handles are usually installed to uPVC window frames and are always the same size with a 43mm central. Cockspur handles are available in a variety of sizes, from 58mm to 62mm. Window handles made of Cadenza are different in size because they feature an angled blade that operates an interlocking mechanism that is multi-point inside the window.
Another consideration when selecting the best window handle is knowing what hand you will need to use. This is determined by the hand you use to open the door. Inline espag window handles are not handed and can be utilized on either left or right handed windows. Cranked window handles are only compatible for windows that are open in one direction.
2. Remove the Handle
A window handle that has fallen out can be frustrating, whether the handle is damaged or worn out. The good news is that replacing a uPVC window handle is a straightforward job that you can do yourself. All you require is a few basic tools and a bit of time to complete the process.
You will need to first open the window, and then ensure that it's not locked. Then, remove the screw caps holding the handle in place. After these have been removed, you can begin working on removing the handle itself.
The handle is connected to a spindle in the window frame. The handle is held in place by either a screw or pin, depending on the type of handle. The most commonly used types of handles are inline Espagnolette handles and the cockspur handles. Both types of handles can be found on casement windows, as well as aluminum ones. The handles can be locked with a key to prevent unauthorised access from the outside. Or you can lock the handles by turning them clockwise.
To remove the handle you will need a flat-bladed screwdriver. Once the clip is released, the handle should slide off the spindle. After the handle has been removed, you will need to measure the length of the spindle to make sure that the new handle is compatible with this size.
Once you have the correct size, you can put the new handle in the correct position. It is important to ensure that the handle is securely fastened and that it rotates in the proper direction (clockwise in the case of an open or counterclockwise if the handle closes). It is essential to make sure that the handle has not been installed upside down.
Replace the screw caps. After you've done this you can test the handle to confirm that it functions properly. Also, you should test the locking mechanism by moving the handle until it is locked position, and then back to the locked position.
3. Take the Screws off
A uPVC handle is an important part of any house and is the first thing to show signs of wear or damage. This could be due natural factors, regular use, or even damage caused by criminals looking to gain access to your home. However, a simple replacement will solve the issue and prevent the issue from recurring.
uPVC handles could also be difficult to remove if the locking mechanisms are not functioning properly. In most cases, the issue can be resolved by replacing the multipoint lock instead of the entire handle, and it's certainly worth checking this because it could save you money.
After you've removed the old handle, you'll need to take off the screws that secured it. The screws are typically located on the inside of the base of the handle. You may require a screwdriver for this and it's essential that you don't over tighten as this can cause the handle to become loose.
Then, you'll have to find the pins or screws that hold the handle in place. These are usually located on the inside of the base of the handle. You will need a screwdriver to remove them. Once they're removed you will have to replace the screw caps should you choose to do so, and then test the new handle to confirm that it's working correctly.
Install the handle by adjusting the spindle with the cutout in the window mechanism. Then screw it into. Make sure the handle is in the open position and that any screws are tightly fixed before replacing the screws' covers, in the event that you want to do this. Then you can enjoy the new window handle. This should help you avoid costly door and window replacements in the near future. Contact us if need more information on this or any other aspect of your uPVC window.
4. Install the New Handle
The process of replacing a broken window handle or updating it is simple and can be completed within just a few steps. Identifying the kind of window handle, determining its spindle length and knowing what tools you'll require to finish the job are crucial. Always ensure security when working with windows and tools. It is also essential to take your time and follow the steps with care to ensure that you have a functional handle that is safe to use.
The first step is to find the screws that hold your current window handle in place and take them out, while maintaining a safe hold on the handle itself to prevent it from falling and causing injury. Once the screws have been removed, they can be placed in a safe place to be replaced in the future.
Once the old handle was removed, you can now begin fitting the new one. It is crucial that the handle fits perfectly so that it functions correctly and locks the window in position. The next step is to slide the metal square at the back of the handle into the hole in your window mechanism, ensuring that it fits securely.
Once your new handle is installed, the final thing to do is replace the caps on the screws and test it to make sure it works. If you aren't satisfied with the results or if your window does not open or close correctly, call our experts for assistance.
The majority of homes in the UK have uPVC windows and as such, many of them will require to be replaced in the near future due to damage or wear. The process is relatively straightforward and can be completed by anyone with a bit of experience in DIY. It is important that the handle you select matches the size and style of your window. If you're unsure about what type of handle you need, feel free to get in touch with our team who will be able to guide you through the possibilities available.