10 Erroneous Answers To Common Replacing A Window Handle Questions Do You Know The Right Answers?
Tips For Replacing a Window Handle
It is simple to change your window handle in the at-home comforts of your home. Follow these tips to ensure a smooth and beautiful finish.
Remove the screw covers from your uPVC handle to reveal the screws. Measure the spindle to make sure you're getting the correct size replacement.
1. Take a measurement of the length of the Spindle.
When you're replacing a window handle, it's important to get the size of the spindle correct. It could influence the tightness or looseness of the handle and whether the handle will lock properly into the window frame. The spindle is the metal shaft that connects to the handle and the lock in the window frame. The spindle can be found in the standard 8mm industry cross-section or older 9mm versions. The current industry standard is 8mm but this wasn't always the case so when purchasing a new handle, it is important to check the dimensions.
Remove the handle. This is done by turning the handle in the open position, and unwinding two screws that hold the handle in place (which are often hidden behind plastic caps that must be removed). Once removed take a measurement from the base of the handle until the end of the spindle. This will provide you with the measurements you need to buy a replacement.
There are a variety of options when it comes time to choose a new window handle. From sleek chrome that will fit into modern homes to traditional burnished bronze that looks beautiful in restored Georgian rooms, or even the more traditional Tudor cottages with curled mongoose tail latches. The options are endless but the most important thing to do is choose a style that suits your home.
Espag handles are commonly used to uPVC window frames and are always the same size, with a 43mm centre. Cockspur handles range between 58mm and 62mm however luckily there are replacements available for both sizes. Window handles from Cadenza are a different size again since they have an angled blade that functions a multi-point locking mechanism inside the window.
Another aspect to consider when selecting the right window handle is knowing which hand you will need to use, which is defined by what hand you use to open the door. Inline window handles aren't handed and can be used on right or left handed windows. Cranked window handles are handed and can only be used on windows that open in only one direction.
2. Remove the Handle
A window handle that falls out can be frustrating, regardless of whether the handle has been damaged or worn out. The good news is that you can replace a uPVC handle by yourself. You will require only a few basic hand tools and some time to complete this process.
You will need to first open the window and then ensure that it's not locked. The next step is to remove the screws that hold the handle in position. Once these are removed, you are able to work on removing the handle itself.
The handle is attached to a spindle in the window frame. This is either fixed with either a screw or pin, depending on the type of handle. repairmywindowsanddoors.co.uk used types of handles are inline Espagnolette handles and handles with cockspurs. Both types of handles can be found on casement windows, including aluminum ones. They can be locked by using a key to prevent unauthorised opening of the window from outside, or you can lock them by turning the handle clockwise.
To remove the handle, you will require a flat-bladed screwdriver. After the clip has been released, the handle will slide off the spindle. Once the old handle is removed, you'll need take a measurement of the length of the spindle to ensure that the new handle will fit.
Once you have decided on the proper size for the handle, screw it in place. It is crucial to make sure that the handle is securely fastened and that it rotates in the correct direction (clockwise when the handle is open and counterclockwise if handle is closed). It is also important to check that it is not installed upside down.
In the end, you must replace the screw cap caps. After you've done that then you can test the handle to ensure that it functions correctly. You can also test the locking mechanism by moving the handle from an unlocked position to the locked one and back.
3. Take the Screws off
A uPVC handle is an essential component of any house and is the first thing that shows signs of wear or damage. This could be due to natural factors or through frequent use, and sometimes intentional damage caused by criminals who may want to open a closed window and gain access to your home. A simple fix can resolve the problem and prevent it from happening again.
UPVC handles can also be difficult to remove when the locking mechanisms aren't functioning correctly. Most of the time, the issue can be resolved by replacing the multipoint lock, rather than the entire handle. It's worthwhile to check this out since it can save you money.
After you have removed the handle, you'll need to remove the screws that were holding it in place. They're usually on the inside of the handle base. You may need to use a screwdriver to accomplish this and it's important that you don't over tighten, as this could cause the handle to loosen.
The next step is to find the fixing screws or pins that hold the new handle in the correct position. These are usually located on the inside of the base of the handle. You will need a screwdriver to remove them. If you wish to replace them, you should replace the caps on the screw and check the handle to ensure it functions properly.
If you're ready to put in the new handle, simply line up the spindle with the cut-out in the window mechanism and screw it in the right position. If you wish to replace the screws make sure that the handle is in a position that is open and that any screws are securely attached. It's done! You can enjoy the new window handle. Hopefully this will help you to avoid the need for expensive window and door replacement services in the future. Contact us if need more information on this or any other aspect of your uPVC window.
4. Fit the New Handle
The process of replacing a broken window handle or updating it is easy and can be accomplished in only a few simple steps. Identifying the kind of window handle, determining its spindle length, and knowing what tools you'll need to complete the task are key. Always consider the safety of your windows and tools. It's also important to be patient and follow the steps to ensure that you have a functional handle that is safe to use.
The first step is to identify the screws holding your existing window handle in place and take them out, while maintaining an adequate grip on the handle itself to prevent it from crashing and injuring yourself. Once the screws are removed, you can put them in a secure location to be replaced in the future.
Once the old handle was removed, you are now able to begin fitting your new handle. It is crucial that the handle fits perfectly to ensure it functions correctly and locks the window in its place. Then you need to slide the metal bar that is square on the handle into the window mechanism hole.
After the new handle is in place, the final step is to replace the caps on the screws and verify that it works. If you're not satisfied with the result or if the window doesn't open and close as it should then the next step is to call our experts who will be able to assist you.
The majority of UK homes have uPVC Windows. As such, many will require replacement at some point because of wear and tear or breakage. Anyone with some DIY knowledge can complete the task. The most important factor in the success of this procedure is ensuring that you're using a replacement handle that is compatible with your window's size and design. If you're not sure about the type of handle you require, please get in touch with our team who can help you navigate the various options available.