10 Amazing Graphics About Double Glazing Door Lock Repairs
Double Glazing Door Lock Repairs
Have your uPVC window or door mechanism deteriorated? Perhaps the door or window handles don't meet up properly or are difficult to use.
It's important that your double glazed doors work smoothly, otherwise you'll be wasting energy and increase the chances of burglary. Owen the Locksmith will be able to repair your door lock for an affordable price.
Snapped Key
It can be quite frustrating when a key snaps into the lock. It could also be a security risk, as the door may not be locked and could leave you vulnerable to intruders. There are a few easy fixes you can try to resolve the issue and get your door working again.
Be calm. If you panic you may end up pushing the broken key further into the lock.
Spray WD-40 or another penetrating lubricant into the lock. This will help the broken piece come out more easily. You can also use the screwdriver to break up any pieces stuck. If you have a part of the key that's stuck then grab it using the help of a paperclip or any other thin metal object and pull it. Both methods work well, however, be very careful not to push the broken piece of the key further into the keyway.
Some paperclips have grooved edges, which can serve as hook extractors, and some Jigsaw blades also work for this function. If you don't have any of them handy, you can use needle-nose pliers to bend them and create a hook. Finally, a pair of tweezers can be used to grip and pull out the remaining bit of the broken key.
If you are unable remove the broken key piece, use a lock deicer. It's available at most hardware stores and is used to freeze any moisture that may be present in the lock.
If none of these solutions work, it may be time to contact a locksmith. The experts at Fitlocks can quickly fix issues such as broken handles and snapped keys with uPVC locks and door mechanisms. They can also reconfigure your double glazing door mechanisms to make them easier to operate. You can book an appointment online for a double-glazing repair or call us to discuss your needs.
Broken Cylinder
A broken cylinder is a serious security threat. Luckily, it's an easy repair for professional locksmiths to complete. To repair the cylinder, locksmiths must tap it. This can be done with a hammer or other tool. However, the best method is to employ a wire or long match. Then, put the match's end or wire close to the keyway. The locksmith can then strike the lock in order to break it. This is far better than using a hammer that could damage the lock.
Overheating is the main reason behind cylinder heads cracking. This can occur when the cylinder block as well as the cylinder head are made of various metals, such as cast iron and aluminum. Different metals can heat up and cool down at different rates. This can cause localised hotspots to expand faster than the rest.
Another possible cause of cracks in the cylinder is corrosion. If the cylinder block and head are not maintained in a timely manner they could be corroded or rust and cause them to expand more than they would normally. Over time, this can also cause cracks.
If your uPVC window or door lock is brittle and requires a lot of pressure to turn it could be due to a variety reasons. A faulty locking mechanism, misalignment, or a worn handle are common reasons for this issue.
Fortunately it's a simple and cost-effective fix for the majority of double glazing owners. A professional locksmith will usually solve this issue within an hour of arriving at the property. Depending on the needs of your home they will be able to replace the locking mechanism, replace the window handles, and also change the gearboxes. A skilled locksmith will always be able to advise you of the most cost-effective solution for your home. They may suggest upgrading to 3 Star TS007 Euro Cylinders, which provide an additional layer of protection against burglars. This is a small cost to pay for the peace of mind that comes with knowing your uPVC doors are secure.
Broken Handle
Window handle locks have complex mechanisms that become less effective with age and usage, so it's no surprise that they can break. If yours breaks it may be difficult to identify the cause of the issue and make sure you fix it properly.
Repairing your damaged handle, whether it's the internal latch or locking mechanism will increase the security of your uPVC door and prevent draughts. It is costly to repair or replace your handle if it is not done correctly and could also harm the frame and the lock of your door.
Screwdriver When the window is open and the screw loose, loosen the handle. The screw should be located on the inside of the backplate. It is typically concealed by an eye-catching cap to conceal it for aesthetic reasons. Be careful not to lose any internal components inside the handle, like the plates or levers on the opposite side of the spindle. Keep them in the same arrangement so that it is easier to replace them if needed.
Next, turn the handle until it's 90 degrees to the window frame and loosen the screw on the back of the handle that holds it to the internal spindle with a second screwdriver. Once this is removed, you should be capable of pulling the handle away and pull out the broken spindle. Replace this with a new one, ensuring it's the same length as the old one (you can typically find these on the internet or in hardware stores) and securely screw it into place. Be careful not to tighten too much as this could cause damage to the handle or the window frame.
Close the handle and test it. It should function smoothly and you'll be able open your window after a few times.
While you're working on the handle, be sure to check your uPVC windows are closing properly. If they're not closing properly, you could experience draughts or damp in your home. Also, you could be compromising the energy efficiency of your home. Core Sash Windows is a local window company that can alter the hinges of the window frames to ensure that they close properly.
Broken Spindle
It is more typical for the spindle to break rather than the handle. This is especially common with uPVC tilt-and-turn windows. These windows require a handle that acts as an locking device within the frame of the window. The handle is connected to a centre rod that in turn activates mushroom-like locking cams, these locks are inserted into the window frame. If the dead latch mechanism fails to open when the handle is turned it is likely that the spindle has been damaged and this could be a frustrating problem.
There are ways to fix this issue. A reputable locksmith can quickly and effectively address this problem. They can take apart the window handle using a tool to remove the wheel portion of the mechanism where the spindle is. This can be done without damaging the handle or causing other damage to the frame of the window.
Once the wheel has been removed, the technician will examine the spindle to determine what has caused it to break. This involves breaking the spindle into its component parts and meticulously noting their general condition, as well as any specific areas of wear or damage. This procedure is typically performed by technicians in an environment that is clean.
The next step is to clean the damaged spindle. This will help remove any dirt or other debris that might be preventing it from functioning normally. Following this the spindle is cleaned, it can be repaired or replaced. If the technician is replacing the spindle it is possible to use a dowel that is comparable in size to the original. The technician will then drill matching holes into both pieces. This will ensure that the spindle is perfectly matched with the handle.
If Twickenham double glazing that is damaged is beyond repair, it may be required to replace it completely. Home centers sell generic replacements however if your window design is unique, you will have to speak with an expert in cabinet making or woodworking who can replicate the exact part. Once the spindle has been installed, it can be fixed to the handle. The screw holes on the handle with the screws already in the frame. Once the handle is seated, you can operate your uPVC windows.